Traxxas 8400Mah 11.1V 3-Cell 25C Lipo

This is the Traxxas Power Cell 11.1V 8400mAh 25C 3S LiPo Battery.

FEATURES:
Semi stiff building does not require a hard case and gets rid of
    wire harness ports that can loosen up and fail
Engineered specifically to fit Traxxas models
12AWG multi strand wire is soldered straight to the LiPo cells
    getting rid of increased resistance from bullet ports and
    accidental reversed polarity connections

INCLUDES:
Traxxas Power Cell 11.1V 8400mAh 25C LiPo 3S Battery with High
    Current Connector and JST/XH Balance Plug

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235
LiPo charging bag

SPECIFICATIONS:
Configuration: 3S2P
Continuous Discharge: 25C (210A)
Max Burst Rate: 50C (420A)
Watt Hours: 93.24
Charge Rate: 1C (8.4A)
Max Charge Rate: 2C (16.8A)
Dimensions: 6.1 x 1.7 x 1.8" (155 x 44 x 45mm)
Weight: 21.7oz (615g)

REMARKS:
ALWAYS use a LiPo-approved Battery charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.20V per cell
NEVER Charge at currents greater than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Discharge listed below 2.5V per cell
NEVER dismantle or customize pack circuitry in any way or leak cells
NEVER place on combustible products or leave ignored during
    charging
ALWAYS Charge in a fireproof place
ALWAYS set charger's output volts to match battery volts
CONSTANTLY stay out of reach of kids

The listed below thing also pairs really well with the thing being talked about.

Adapter Traxxas ID LiPo Battery

This is the Traxxas iD LiPo Battery Adapter.

FEATURES:
Links Traxxas iD LiPo batteries to LiPo chargers with different
    balance ports

INCLUDES:
iD LiPo Battery Adapter with 3S Balance Port
Adapter with 2S Balance Port

SPECIFICATIONS:
Length: 5.2" (132mm) consisting of ports

This thing praises the above talked about thing.



This is the 2.4GHz Radio Controlled, Brushless Electric Powered,
Ready to Run Traxxas X-Maxx.

Innovative New Characteristic Include;

**Exclusive Self-Righting Action, if car rolls upside down**
**simply press a button on the transmitter and in most cases**
**the X-Maxx will flip upright onto its wheels.**

**One handed body mount and elimination system**
**gets rid of body posts and pins.**

**Battery Retention System gets rid of body clips or hook and loop straps**

**Shock towers also act as bring handles and level supports**
    **when car is placed upside down for maintenance.**

**Additional Technical Info Will Be Included When It Becomes Available.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic components to manage wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    great tuned or shut off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Composite nylon tub, modular design supplies simple access
    to critical components, lower front and rear skids and integrated
    nerf bars for front, rear and side effect defense
Drive 4 wheel shaft drive, high-strength steel CV driveshafts with
    splined wheel hexes that get rid of axle pins, aluminum splined
    center driveshaft
Brushless Motor: Velineon 1600, 4 pole 1600Kv, 5mm shaft, aluminum
    heat sink
Motor Mount: Cradle design gets rid of flexing, keyed pins lock equipment
    mesh in location
Radio: 2.4GHz TQi transmitter with 5-ch micro TSM telemetry ready
    receiver, BEC voltage and motor temperature level sensors set up,
    self righting button, integrated fail safe,
    can be geared up with the TQi Docking Base together with the iPhone,
    iPad or iPod touch* to develop a visual user interface for the
    car Traxxas Link TQi Wireless Module needed (not suched as)
Guiding Servo: High-torque with aluminum heat sink, double shear
    bearing supported servo horn
Electronic Speed Control: Velineon VXL-6s 6S LiPo suitable
Transmission; Single speed
Differentials: Sealed hardened steel bevel, oil filled, minimal slip
Slipper Clutch: Dual fan cooled
Battery Retention System: Integrated into chassis top brace for
    greater rigidity, gets rid of body clips or hook and loop straps,
    adjustable for various batteries
Body: ProGraphix painted and trimmed
Body Mount System: Quick one-hand body setup and elimination,
    rotating rear lock mechanism gets rid of body posts and clips
Suspension: Caught high-strength steel pins, double large
    connections, adjustable roll center
Shocks: GTX aluminum bodied, oil-filled, integrated wiper seal keeps
    shafts clean reducing seal wear
Shock Towers: Composite plastic building, also act as bring
    handles and level supports when car is placed upside down
Tires: Aggressive all-terrain tread 8 x 4 x 4"
    foam inserts
Wheels: 4.3x5.7 inches (110x145mm), 17mm hexes
Steering: Bellcrank
Bumpers: Front and rear composite plastic with effect cushions
    behind each bumper to soften blows and contribute to durability
Ball Bearings: Sealed, complete contact
Radio Box: Waterproof

INCLUDES:
RTR X-Maxx Truck with Brushless Motor, Radio, ESC, Painted Body,
    Quick Start Guide and Upkeep Tools

REQUIRES:
Batteries: 2 3S LiPo 5000mAh or greater
Battery Battery charger: Suitable with selected LiPo batteries
AA Cells: For for transmitter
LiPo Charging Bag

SPECIFICATIONS:
Automobile;
Length: 29.84" (758mm)
Front Track: 22.26" (540mm)
Rear Track: 20.66" (525mm) range from external edges of wheels
    measured side-to-side
Ground Clearance: 4" (102mm)
Weight: 19.1lbs (8.66kg)
Trip Height: 13.79" (350mm)
Overall Drive Ratio: 8.24
Wheelbase: 18.92" (480mm)
Shock Length: 7.4" (187mm)
Battery Tray Dimensions: 7.7 x 2 x 1.7" (197mm x 51.5mm x 44mm)
    Body;
Length:
Width:
Height:

REMARKS:
Readily available in the following colors;
    Blue, TRAD75BB
    Red, TRAD75RR

For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set