Traxxas 70T Spur Gear 32P

This is the spur gear (or primary gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Functions: Tough nylon construction
Drilled for lightweight

Specifications: Teeth-70
Pitch-32

Needs: Absolutely nothing, this is a direct replacement part.

Comments: This is the same gear that is available in the truck set.

2/10/97
AST

Get this product to enhance the one you are reading around.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS packages that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FEATURES:
Made of RULON

INCLUDES:
Twelve pegs ***Colors might vary from photo***

SPECIFICATIONS:
length - 3.5mm
size - 3mm

COMMENTS:
These pegs go in the holes on the side of the spur gear.

Below is another product that praises the product being talked about.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas packages
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are set up on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: Two notched rings

Want another terrific product to enhance the above discussed product?

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design stimulate gear.

INCLUDES:
One 72 tooth spur gear

NEEDS:
The other parts of that comprise the slipper clutch are:
    #1994 - tension spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - top gear shaft to slipper adapter TRAC4185

SPECIFICATIONS:
Tooth: 72
Pitch: 32

Many others have gotten this product in addition to the product that you are presently checking out.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Task Long Glowplug.

FEATURES:
Suitable for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Matched for the different throttle range of off-road racing
Medium heat range

INCLUDES:
One Traxxas Medium Heat Range Super Task Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for installing in cylinder head
Glow Fuel with 10%-20% nitro material

The listed below product additionally pairs actually well with the product being talked about.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all variations of the T-Maxx and E-Maxx
Nylon blend construction, black in color
Locknuts utilized at the chassis and skid plate mounting holes to
    securely lock bulkheads in location, lowering the possibility of breakage

INCLUDES:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws