Traxxas 70T Spur Gear 32P

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks.

Includes: One 70 tooth gear

Features: Tough nylon building
Drilled for light weight

Specs: Teeth-70
Pitch-32

Needs: Nothing, this is a direct replacement part.

Comments: This is the same gear that can be found in the truck set.

2/10/97
AST

Get this product to improve the one you are reading about.

Slipper Friction Pegs (12) For Nitro And Older Electric Models

These are replacement slipper friction pegs for all the TRAXXAS kits that
have a slipper clutch such as the TRX-3, TRX-1, NITRO HAWK, LS-II, etc...

FEATURES:
Made from RULON

INCLUDES:
Twelve pegs ***Colors may vary from image***

SPECS:
length - 3.5mm
diameter - 3mm

REMARKS:
These pegs go in the holes on the side of the spur gear.

Below is an additional product that praises the product being gone over.

Slipper Pressure Rings (2)

These are the replacement slipper and differential rings for the Traxxas kits
that have slipper clutches and ball diffs (Rad 2, Hawk 2, TRX-1 and Blue
Eagles). They are metal rings with a notch in them and are installed on either
side the differential gear or the spur gear.

PACKAGE
INCLUDES: Two notched rings

Want an additional excellent product to match the above pointed out product?

72T Spur Gear 32P

This is the Replacement 72 Spur Gear for the
Traxxas Nitro Rustler and Nitro T-Maxx Trucks.

FEATURES:
Black plastic, slipper clutch design spur gear.

INCLUDES:
One 72 tooth spur gear

NEEDS:
The other parts of that make up the slipper clutch are:
    #1994 - stress spring TRAC7994
    #4625 - pressure plate TRAC9625
    #4622 - pressure rings TRAC9622
    #4685 - friction pegs TRAC9685
    #4185 - top gear shaft to slipper adapter TRAC4185

SPECS:
Tooth: 72
Pitch: 32

Lots of others have actually purchased this product along with the product that you are currently reviewing.

Glow Plug S-Dty Long/Med

This is the Traxxas Super Duty Long Glowplug.

FEATURES:
Suitable for all Traxxas engines consisting of the 2.5, 2.5R and 3.3 engines
Suited for the varied throttle range of off-road racing
Medium heat range

INCLUDES:
One Traxxas Medium Heat Variety Super Duty Long Glowplug with gasket

NEEDS:
Plug wrench (HCAP2550) for setting up in cylinder head
Glow Fuel with 10%-20% nitro content

The below product also sets actually well with the product being gone over.

Front Bulkheads For The Traxxas T-Maxx & E-Maxx-Black

These are the RPM Front Bulkheads in Black
for the Traxxas T-Maxx and E-Maxx.

FEATURES:
Fits all variations of the T-Maxx and E-Maxx
Nylon mix building, black in color
Locknuts utilized at the chassis and skid plate installing holes to
    securely lock bulkheads in place, reducing the opportunity of damage

INCLUDES:
One each Left and Right Front Bulkhead
8 M3 Locknuts
4 M3 x 20mm Flathead Screws
4 M3 x 22mm Flathead Screws