Traxxas 8 X 16 X 5Mm Ball Bearing (2) Blue Rubber Sheild R Evo

    These are the replacement Differential Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Building and construction
Blue Rubber Sealed

SUCHES AS:
Two 8mm x 16mm Rubber Sealed Bearings

REQUIRES:
Assembly onto Car

SPECIFICATIONS:
Inner Diameter: 8mm (0.31")
Outer Diameter: 16mm (0.62")
Thickness: 5mm (0.19")

Here is a great thing that several others have actually bought at the exact same time.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building and construction
Protected with blue rubber seals

SUCHES AS:
Two Ball Bearings

REQUIRES:
Assembly to vehicle

SPECIFICATIONS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one required).

Here is a great thing that several others have actually bought at the exact same time.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building and construction
Blue rubber dirt guards

SUCHES AS:
(2) ball bearings, Part #5117

SPECIFICATIONS:
Inside diameter: 6mm
Outside diameter: 12mm
Width: 4mm

REMARKS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

This thing is frequently bought with the above mentioned thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing is frequently bought with the above mentioned thing.

Diff Ring Gear / Pinion Gear Revo

This is the Differential Ring Gear and Pinion
for usage with the Traxxas Revo 3.3.

FUNCTIONS:
Direct replacement part

SUCHES AS:
One differential ring equipment
One pinion equipment

REQUIRES:
Traxxas Revo 3.3
2.5x8mm cap head screws (TRAC3965)

This thing praises the above gone over thing.

Gear Set, Differential

This is the Differential Gear Set for the Traxxas Revo and E-Maxx.

FUNCTIONS:
Steel building and construction

SUCHES AS:
Two Output Gears
Two Spider Gears
Spider Gear Shaft and Diff Provider Support
Guideline Sheet

REQUIRES:
Diff lube;
10K weight TRAC5135 50K weight TRAC5137
30K weight TRAC5136 Multi-weight set TRAC9136

You will certainly love this item if you have the item previously stated.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Hub Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building and construction
Blue Rubber Sealed

SUCHES AS:
Two 12mm x 18mm Blue Sealed Stainless Wheel Hub Bearings

REQUIRES:
Assembly onto Car

SPECIFICATIONS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Hubs, the Truck Needs
Four Total of these Bearings.

Get this thing to enhance the one you are reading about.

Diff Carrier / X-Ring Gaskets (2) / Ring Gear Gask Et/ 6 X 1

This is the Diff Provider/Gasket Set for the Traxxas Revo.

FEATURES:
Plastic Diff Provider
Blue Rubber Shaft Gaskets
Black Rubber Diff Carrier Gaskets
Gray Washer

SUCHES AS:
One Diff Provider
Two Blue Rubber Shaft Gaskets
One Black Rubber Diff Provider Gaskets
One Gray Washer

REQUIRES:
Assembly to vehicle

This thing praises the main item right here.

Diff Housing Frnt & Rr Revo

This is the Front and Back Differential Real estate
for the REVO from Traxxas.

FEATURES:
Long lasting black nylon building and construction

SUCHES AS:
One diff housing (2 pieces)

REQUIRES:
TRAC5119 10x15mm Bearing (1)
    TRAC5118 8x16mm Bearing (1)
    TRAC5117 6x12mm Bearings (2)
    TRAC5381 Diff Provider & Gasket
    TRAC3965 Cap Head Screw 2.5X8MM
    TRAC2587 Cap Head Screw 3X10MM
    TRAC5329 Rear bulkhead
    TRAC5330 Font bulkhead