Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends
Can be Used on Front or Rear

CONSISTS OF:
2 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

NEEDS:
Assembly onto Car

Want one more terrific product to enhance the above pointed out product?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the car

The listed below product additionally sets really well with the product being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above talked about product.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and direction
    sheet

NEEDS:
Installation on the car

Many others have actually acquired this product in addition to the product that you are currently reviewing.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building
Black and Silver in Color
Put together w/Rod Ends

CONSISTS OF:
2 61mm Front Tie Rods
Four Rod Ends
Four Hollow Balls

NEEDS:
Assembly onto Car

You will enjoy this item if you have the item above mentioned.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on car

Below is one more product that praises the product being talked about.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FUNCTIONS:
Nylon building, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Installation on the car

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will enjoy this item if you have the item above mentioned.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the car

This product praises the above talked about product.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon building
Black in color

CONSISTS OF:
One Left Front Suspension Arm
One Right Front Suspension Arm

NEEDS:
Assembly onto Car

Many others have actually acquired this product in addition to the product that you are currently reviewing.

ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Package Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon building, black in color
Increases forward acceleration, corner speed, consistency and
    drivability

CONSISTS OF:
2 front arms
One Proline decal

NEEDS:
Installation onto car