Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends
Can be Used on Front or Rear

INCLUDES:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

REQUIRES:
Assembly onto Automobile

Want one more fantastic item to match the above stated item?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Installation on the car

The below item likewise pairs really well with the item being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the above reviewed item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and guideline
    sheet

REQUIRES:
Installation on the car

Numerous others have purchased this item along with the item that you are presently reviewing.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building and construction
Black and Silver in Color
Put together w/Rod Ends

INCLUDES:
Two 61mm Front Tie Rods
4 Rod Ends
4 Hollow Balls

REQUIRES:
Assembly onto Automobile

You will love this thing if you have the thing above mentioned.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on car

Here is one more item that praises the item being reviewed.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black and silver in color

INCLUDES:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

REQUIRES:
Installation on the car

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will love this thing if you have the thing above mentioned.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two 61mm (96mm center to center) turnbuckles

REQUIRES:
Installation on the car

This item praises the above reviewed item.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Left Front Suspension Arm
One Right Front Suspension Arm

REQUIRES:
Assembly onto Automobile

Numerous others have purchased this item along with the item that you are presently reviewing.

ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Kit Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon construction, black in color
Increases forward acceleration, corner speed, consistency and
    drivability

INCLUDES:
Two front arms
One Proline decal

REQUIRES:
Installation onto car