Traxxas 58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends
Can be Utilized on Front or Rear

CONSISTS OF:
2 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

Want one more great item to match the above stated item?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the car

The listed below item likewise sets really well with the item being gone over.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

CONSISTS OF:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above gone over item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 front 39mm (69mm center to center) turnbuckles and direction
    sheet

NEEDS:
Installation on the car

Many others have actually bought this item in addition to the item that you are presently checking out.

61Mm Turnbuckles (Front Tie Rods) (2) (Includes In Stalled

These are the 61mm Front Turnbuckles
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building
Black and Silver in Color
Put together w/Rod Ends

CONSISTS OF:
2 61mm Front Tie Rods
Four Rod Ends
Four Hollow Balls

NEEDS:
Assembly onto Vehicle

You will certainly love this thing if you have the thing earlier pointed out.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on car

Here is one more item that compliments the item being gone over.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FEATURES:
Nylon building and construction, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

NEEDS:
Installation on the car

SPECIFICATIONS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

You will certainly love this thing if you have the thing earlier pointed out.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
2 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the car

This item compliments the above gone over item.

Front Suspension Arms Left & Right Jato

These are the Front Left and Right Suspension Arms
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Nylon building and construction
Black in color

CONSISTS OF:
One Left Front Suspension Arm
One Right Front Suspension Arm

NEEDS:
Assembly onto Vehicle

Many others have actually bought this item in addition to the item that you are presently checking out.

ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Kit Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not work with the 4x4 Slash.**

FEAUTRES:
Nylon building and construction, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

CONSISTS OF:
2 front arms
One Proline decal

NEEDS:
Installation onto car