Traxxas 4Mm Alum Flanged Nylock Nuts Blue (4)

These are the 4mm Flanged Nylon Locknuts from Traxxas.

FEATURES:
Aluminum building anodized blue in color
Serrated on the back for sure grip

INCLUDES:
4 4mm Flanged Nylon Locknuts

REQUIRES:
6mm nut driver

SPECS:
Hole Diameter: 4mm
Hex Size: 6mm

Several others have purchased this product along with the product that you are currently reading about.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93

This is a superb enhancement to the product currently being discussed.

Teflon Washers 5 X 8Mm (20)

These are Replacement Washers from Traxxas.

FEATURES:
Black plastic construction.
Used on the axles and in the transmission.

INCLUDES:
(20) Washers

SPECS:
Size: 5x8mm
Thickness: 0.5mm

Several others have purchased this product along with the product that you are currently reading about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

Often purchased with the product that you are currently reading about.



This is the 12mm Lock-Pin Type Hex Center from ST Racing
For the Traxxas Electric Stampede, Rustler, Outlaw, Slash
and Nitro Slash.

FEATURES:
Using high quality CNC machined aluminum, these Lock-pin style alum.
wheel hex locks down on the axle pins so loosing pins are no longer a
problem for your Traxxas electric Stampede/Rustler/Bandit or the brand-new
Slash. Aluminum hex are also more durable and less likely to strip
out and offers a much better fit to the wheel hex.

These are blue in color.

INCLUDES:
4 hex centers
One 1.5mm Allen L-wrench

SPECS:
Width: 12mm (15/32")
Thickness: 6mm (5/16")
Diameter, hole: 5.5mm (7/32")

REMARKS:
These adapters can be set up on
Traxxas Stampede (TRAC23** & TRAD14**)
Traxxas Rustler (TRAC14**)
Traxxas Slash (TRAD19** & TRAD27**)
Traxxas Outlaw (TRAD13**)
Traxxas Nitro Slash (TRAD77**)

This product compliments the main item here.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electric
(not Nitro) Rustler
Also called the vertical kingpin

INCLUDES:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

This is a superb enhancement to the product currently being discussed.

Spur Gear (90T) 48P

This is a Traxxas 48P, 90T Spur Gear for designs
with Torque Control Slipper Clutch.

FEATURES:
48 pitch
90 tooth
Developed for designs with a slipper clutch
Black plastic building

INCLUDES:
One spur gear

SPECS:
Pitch: 48
Tooth: 90

REMARKS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 86T gear (TRAC4686).