Traxxas 49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Setup on the car

This item is regularly gotten with the above discussed item.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two front 39mm (69mm center to center) turnbuckles and guideline
    sheet

REQUIRES:
Setup on the car

The listed below item also pairs truly well with the item being discussed.

Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

CONSISTS OF:
Two 61mm (96mm center to center) turnbuckles

REQUIRES:
Setup on the car

Want one more great item to enhance the above discussed item?

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends
Can be Used on Front or Rear

CONSISTS OF:
Two 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

REQUIRES:
Assembly onto Car

This item is regularly gotten with the above discussed item.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Kit Rear Arms
for use on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon construction, black in color
Increases forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
Two rear arms
One Proline decal

REQUIRES:
Setup onto car

This item is regularly gotten with the above discussed item.

ProTrac Susp Kit Fr Arms Slash

This is an optional Pro-Line ProTrac Suspension Kit Front Arms
for use on the 1/10 scale 2WD Traxxas Slash.
**Will not deal with the 4x4 Slash.**

FEAUTRES:
Nylon construction, black in color
Increases forward velocity, corner speed, consistency and
    drivability

CONSISTS OF:
Two front arms
One Proline decal

REQUIRES:
Setup onto car

Below is a great item that lots of others have purchased the same time.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel construction

CONSISTS OF:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on car

You will certainly enjoy this thing if you have the thing above discussed.

Steering Drag Link 3905

    This is the Steering Drag Link for the Traxxas E-Maxx.

FEATURES:
Nylon construction, black and silver in color

CONSISTS OF:
One steering drag link (4x72mm turnbuckle, rod ends and hollow balls)

REQUIRES:
Setup on the car

SPECS:
Length: 3.93" (100mm)
Shaft diamter: .15" (4mm)

This item is regularly gotten with the above discussed item.

3 X 15Mm Button Hex Screw (6)

This is a package of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo beast truck, can also be used in any
    application where a 3x15mm button head screw is required

CONSISTS OF:
6 3x15mm Traxxas Button Head Screws

REQUIRES:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm