Traxxas 31T Pinion 48P

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building, silver in color

INCLUDES:
One 31 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outdoors Size: .69" (17.5mm)

Below is a terrific product that lots of others have bought at the same time.

Spur Gear (76T) 48P

This is a 48P, 76T Spur Gear for models with
Traxxas Torque Control Slipper Clutch.

FEATURES:
48 pitch
76 tooth
Developed for models with a slipper clutch.
Black plastic building

INCLUDES:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 76

REMARKS:
For this slipper clutch design there is likewise a 86T gear (TRAC4686),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

This product is frequently acquired with the above pointed out product.

26T Pinion 48P

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw
from Traxxas.

FEATURES:
Steel building, silver in color

INCLUDES:
One 26 Tooth, 48 Pitch Pinion Gear
One 3x4mm Set Screw (1.5mm hex size)

REQUIRES:
Setup

SPECIFICATIONS:
Length: .42" (10.5mm)
Inside Size: 1/8"
Outdoors Size: .58" (14mm)

Below is another product that compliments the product being discussed.

Pinion Gear 48P 25T

This gear is a steel pinion gear in 48 pitch

Functions: Brass pinion gear

Consists of: 1 gear and 1 set screw

Specs: Steel, 48 pitch, 25 tooth pinion gear.
    Shaft length- 3/16" Gear length- 1/4" Total length- 7/16"
    Shaft size- 1/4" Gear size- 1/2"
    Mounting shaft (motor shaft) 1/8"

This product compliments the above discussed product.

Spur Gear 45T Vxl

This is the 45T Spur Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Nylon building
Black in color

INCLUDES:
One 45T Stimulate Gear

REQUIRES:
Setup on the car

SPECIFICATIONS:
Outer Size: 24.75mm (0.97")
Inner Size: 5.5mm (0.22")
Width: 7mm (0.28")

You will love this item if you have the item just above discussed.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building

INCLUDES:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Setup on the car

This product compliments the main item right here.

Pinion Gear 48P 28T 4-Tec

This is a 28-tooth 48-pitch replacement Pinion Gear for the Traxxas 4-Tec.

FUNCTIONS:
Suitable replacement part for great tuning your Traxxas 4-Tec 4WD remote
    control sedan.
Metal building

INCLUDES:
One Pinion Gear
One Set Screw

SPECIFICATIONS:
Pearly whites: 28
Pitch: 48

You will love this item if you have the item just above discussed.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Suitable for 1/16 scale automobile applications
Prewired with Traxxas high current adapter

INCLUDES:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Port

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECIFICATIONS:
Voltage Score: 11.1V
Ranked Capability: 1300mAh
Discharge Score: 25C continuous
Measurements: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Balancing Port: ElectriFly
Watt Hours: 14Wh

REMARKS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER Trickle Charge
NEVER allow to Discharge listed below 2.5V per cell
NEVER take apart or modify pack electrical wiring in any method or puncture cells
NEVER put on combustible materials or leave unattended throughout
    charging
ALWAYS Charge in a fire-resistant place
ALWAYS set battery charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm