Traxxas 5 X 8 X 2.5Mm Ball Bearing (2) Blue Rubber Shield Revo

This is a 2 pack of Traxxas 5X8mm Ball Bearings.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X8mm ball bearings Part #5114

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 5/16" (8mm)
Width: 3/32" (2.5mm)

Below is one more product that compliments the product being talked about.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This product compliments the above talked about product.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to vehicle

SPECS:
Inner Diameter: 10mm
External Diameter: 15mm
Side Thickness: 4mm

COMMENTS:
These bearings are utilized to support the Main Clutch (one required).

You will like this item if you have the item earlier stated.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless-steel Building
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

REQUIRES:
Assembly onto Automobile

SPECS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Thickness: 4mm (0.15")

COMMENTS:
These are for the Within the Wheel Centers, the Truck Requires
Four Total of these Bearings.

This product compliments the main item here.

4 X 7 X 2.5Mm Bearings (2) (Rubber Shield

These are a pair of 4x7mm Rubber Sheilded Bearings
from Traxxas for use on the Jato 2.5.

FUNCTIONS:
Rubber protected
Steel construction

INCLUDES:
Two rubber protected bearings

REQUIRES:
Absolutely nothing

SPECS:
Thickness: 2.6mm
Inner Diameter: 4mm
External Diameter: 7mm

You will like this item if you have the item earlier stated.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel construction
Blue rubber dirt guards

INCLUDES:
(2) ball bearings, Part #5117

SPECS:
Inside size: 6mm
Outdoors size: 12mm
Width: 4mm

COMMENTS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

Below is one more product that compliments the product being talked about.

Steering Arm Mount Steering St

    This is the Steering Arm Mount for the Traxxas Revo.

FEATURES:
Black plastic construction
Requirement and optimum throw steering stops

INCLUDES:
Steering arm install Part #5343X
Steering stop #5343X

REQUIRES:
Setup on the Traxxas Revo

You will like this item if you have the item earlier stated.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite construction
Red in color

INCLUDES:
Four Pushrods
Eight Hollow Balls

REQUIRES:
Setup on the vehicle

SPECS:
Length: 70mm (2.8")
Diameter: 5mm (0.20")

This product compliments the above talked about product.

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FUNCTIONS:
Nylon construction
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
Two 3x25mm Button Cap Screws
Two 4x10mm Button Cap Screws

REQUIRES:
Setup on the vehicle