Traxxas 5 X 8 X 2.5Mm Ball Bearing (2) Blue Rubber Shield Revo

This is a 2 pack of Traxxas 5X8mm Ball Bearings.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X8mm ball bearings Part #5114

SPECS:
Inside size: 3/16" (5mm)
Outside size: 5/16" (8mm)
Width: 3/32" (2.5mm)

Below is an additional item that compliments the item being discussed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This item compliments the above discussed item.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for use on the Traxxas Revo.

FEATURES:
Steel Building
Protected with blue rubber seals

INCLUDES:
2 Ball Bearings

NEEDS:
Assembly to vehicle

SPECS:
Inner Diameter: 10mm
Outer Diameter: 15mm
Side Density: 4mm

REMARKS:
These bearings are utilized to support the Main Clutch (one needed).

You will love this product if you have the product previously stated.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Stainless Steel Building
Blue Rubber Sealed

INCLUDES:
2 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

NEEDS:
Assembly onto Vehicle

SPECS:
Outer Diameter: 18mm (0.70")
Inner Diameter: 12mm (0.47")
Density: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Centers, the Truck Requires
4 Total of these Bearings.

This item compliments the main item below.

4 X 7 X 2.5Mm Bearings (2) (Rubber Shield

These are a pair of 4x7mm Rubber Sheilded Bearings
from Traxxas for use on the Jato 2.5.

FEATURES:
Rubber protected
Steel building

INCLUDES:
2 rubber protected bearings

NEEDS:
Nothing

SPECS:
Density: 2.6mm
Inner Diameter: 4mm
Outer Diameter: 7mm

You will love this product if you have the product previously stated.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel building
Blue rubber dirt shields

INCLUDES:
(2) ball bearings, Part #5117

SPECS:
Inside size: 6mm
Outside size: 12mm
Width: 4mm

REMARKS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

Below is an additional item that compliments the item being discussed.

Steering Arm Mount Steering St

    This is the Steering Arm Mount for the Traxxas Revo.

FEATURES:
Black plastic building
Standard and optimum throw steering stops

INCLUDES:
Steering arm mount Part #5343X
Guiding stop #5343X

NEEDS:
Setup on the Traxxas Revo

You will love this product if you have the product previously stated.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite building
Red in color

INCLUDES:
4 Pushrods
8 Hollow Balls

NEEDS:
Setup on the vehicle

SPECS:
Length: 70mm (2.8")
Diameter: 5mm (0.20")

This item compliments the above discussed item.

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES:
Nylon building
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
2 3x25mm Button Cap Screws
2 4x10mm Button Cap Screws

NEEDS:
Setup on the vehicle