Traxxas 5 X 8 X 2.5Mm Ball Bearing (2) Blue Rubber Shield Revo

This is a 2 pack of Traxxas 5X8mm Ball Bearings.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X8mm ball bearings Part #5114

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 5/16" (8mm)
Width: 3/32" (2.5mm)

Here is an additional thing that compliments the thing being reviewed.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outside diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing compliments the above reviewed thing.

10 X 15 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

This is a set of 10x15mm Ball Bearings for usage on the Traxxas Revo.

FEATURES:
Steel Building
Shielded with blue rubber seals

INCLUDES:
Two Ball Bearings

REQUIRES:
Assembly to automobile

SPECS:
Inner Size: 10mm
Outer Size: 15mm
Side Thickness: 4mm

REMARKS:
These bearings are utilized to support the Primary Clutch (one needed).

You will certainly enjoy this thing if you have the thing earlier stated.

12 X 18 X 4Mm Ball Bearing (2) Blue Rubber Sheild Revo

    These are the replacement Wheel Center Ball Bearings for
the Traxxas Nitro Revo Beast Truck.

FEATURES:
Stainless-steel Building
Blue Rubber Sealed

INCLUDES:
Two 12mm x 18mm Blue Sealed Stainless Wheel Center Bearings

REQUIRES:
Assembly onto Automobile

SPECS:
Outer Size: 18mm (0.70")
Inner Size: 12mm (0.47")
Thickness: 4mm (0.15")

REMARKS:
These are for the Inside of the Wheel Centers, the Truck Requires
4 Overall of these Bearings.

This thing compliments the main item right here.

4 X 7 X 2.5Mm Bearings (2) (Rubber Shield

These are a set of 4x7mm Rubber Sheilded Bearings
from Traxxas for usage on the Jato 2.5.

FEATURES:
Rubber protected
Steel construction

INCLUDES:
Two rubber protected bearings

REQUIRES:
Absolutely nothing

SPECS:
Thickness: 2.6mm
Inner Size: 4mm
Outer Size: 7mm

You will certainly enjoy this thing if you have the thing earlier stated.

6 X 12 X 4Mm Ball Bearing (2) Blue Rubber Sheild R Evo

This is a 6X12mm Ball Bearing Set from Traxxas.

FEATURES:
Steel construction
Blue rubber dirt shields

INCLUDES:
(2) ball bearings, Part #5117

SPECS:
Inside diameter: 6mm
Outside diameter: 12mm
Width: 4mm

REMARKS:
This bearing set is utilized in the transmission and differentials of
    the Revo.

Here is an additional thing that compliments the thing being reviewed.

Steering Arm Mount Steering St

    This is the Steering Arm Mount for the Traxxas Revo.

FEATURES:
Black plastic construction
Standard and optimum toss steering stops

INCLUDES:
Steering arm install Part #5343X
Guiding stop #5343X

REQUIRES:
Installation on the Traxxas Revo

You will certainly enjoy this thing if you have the thing earlier stated.

Push Rod (Molded Composite) (4

These are the Pushrods and Hollow Balls for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Molded composite construction
Red in color

INCLUDES:
4 Pushrods
8 Hollow Balls

REQUIRES:
Installation on the automobile

SPECS:
Length: 70mm (2.8")
Size: 5mm (0.20")

This thing compliments the above reviewed thing.

Front Bumper Slayer

This is the Front Bumper and Mount for the
    Traxxas Slayer Pro 4WD Short Course Nitro RTR

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Bumper
One Bumper Mount
Two 3x25mm Button Cap Screws
Two 4x10mm Button Cap Screws

REQUIRES:
Installation on the automobile