Traxxas 23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas

FUNCTIONS:
Pinion gear with set screw, Silver in color

SUCHES AS:
(1) 23 Tooth 48 Pitch Pinion Gear
(1) One 4mmx2mm set screw

NEEDS:
Setup

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

Often purchased with the product that you are currently reading about.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Gear for models with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for models with a slipper clutch.
Black plastic building and construction

SUCHES AS:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

COMMENTS:
For this slipper clutch design there is also a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

You will certainly like this thing if you have the thing previously mentioned.

19T Pinion 48P

This is a Traxxas 19T 48P Pinion Gear.

FEATURES:
Metal building and construction
Grey in color

SUCHES AS:
One 19T 48P Pinion Gear
One Set Screw

NEEDS:
Setup

This product compliments the main item here.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Hub
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Pot Metal Construction
Silver in Color

SUCHES AS:
One Slipper Press Plate
One Slipper Press Plate Hub

NEEDS:
Assembly onto Vehicle

Want one more excellent product to match the above stated product?

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building and construction

SUCHES AS:
One Steel Disc
Three Friction Pads
Two Springs
One 4mm Lock Nut
One 5mm Lock Nut
Directions

NEEDS:
Disassembly of slipper clutch

Right here is one more product that compliments the product being discussed.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Kit for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body mounts enable a wide range of bodies
    to be utilized consisting of rally vehicle bodies
Constructed of nylon, black in color
Screw-on body mount system gets rid of metal clips

SUCHES AS:
Front and Rear Body Installs and Posts with Installing Hardware

You will certainly like this thing if you have the thing previously mentioned.

Pinion Gear 16T 48P W/Screw Set

    This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas.

FEATURES:
Steel building and construction

SUCHES AS:
16 Tooth 48 Pitch Pinion Gear with set screw

NEEDS:
Setting up on motor shaft

SPECIFICATIONS:
Variety of Pearly whites: 16T
Pitch: 48
Inner Diameter: 0.12" (3mm)

Often purchased with the product that you are currently reading about.

Sealed Receiver Box (Slash)

This is the Receiver Box for the 2WD Traxxas Slash Truck.

FEATURES:
Changes damaged receiver boxes
Constructed of black plastic

SUCHES AS:
One top and bottom half receiver box for the Traxxas Slash
Hardware

NEEDS:
Setting up receiver and bolting receiver box to chassis.

The below product also sets actually well with the product being discussed.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic building and construction

SUCHES AS:
Two Nerf Bars for the Traxxas Slash

NEEDS:
Setup onto Vehicle

Want one more excellent product to match the above stated product?

Hold Down, Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash.

FEATURES:
Black nylon building and construction

SUCHES AS:
One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Angled Body Clip

NEEDS:
Setup on the chassis