Traxxas 23T Pinion 48P

This is a 23 Tooth 48 Pitch Pinion Equipment By Traxxas

FEATURES:
Pinion gear with set screw, Silver in color

SUCHES AS:
(1) 23 Tooth 48 Pitch Pinion Equipment
(1) One 4mmx2mm set screw

NEEDS:
Setup

SPECIFICATIONS:
Outer Diameter: 14mm (9/16")
Inner Diameter: 11mm (7/16")

Often gotten with the item that you are presently reading about.

Spur Gear (86T) 48P

This is a Traxxas 48P, 86T Spur Equipment for designs with
Torque Control Slipper Clutch.

FEATURES:
48 pitch
86 tooth
Designed for designs with a slipper clutch.
Black plastic building and construction

SUCHES AS:
One spur gear

SPECIFICATIONS:
Pitch: 48
Tooth: 86

REMARKS:
For this slipper clutch design there is likewise a 76T gear (TRAC4676),
    83T gear (TRAC4683) and 90T gear (TRAC4690).

You will certainly love this product if you have the product just above discussed.

19T Pinion 48P

This is a Traxxas 19T 48P Pinion Gear.

FEATURES:
Metal building and construction
Grey in color

SUCHES AS:
One 19T 48P Pinion Equipment
One Set Screw

NEEDS:
Setup

This item compliments the main item right here.

Alum Slipper Pressure Plate & Hub Jato

These are the Slipper Press Plate and Hub
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Pot Metal Construction
Silver in Color

SUCHES AS:
One Slipper Press Plate
One Slipper Press Plate Hub

NEEDS:
Assembly onto Automobile

Want one more wonderful item to enhance the above mentioned item?

Rebuild Kit, Slipper Clutch (S

This is the Slipper Clutch Rebuild Package for the Traxxas Slash 4x4 Vehicles.

FEATURES:
Steel building and construction

SUCHES AS:
One Steel Disc
Three Friction Pads
2 Springs
One 4mm Lock Nut
One 5mm Lock Nut
Instructions

NEEDS:
Disassembly of slipper clutch

Below is one more item that compliments the item being gone over.

Extended Fr/Re Body Mounts Slash 2WD

This is the optional Pro-Line Extended Body Mount Package for the
1/10 scale Traxxas Slash 2WD Short Course Trucks.

FEATURES:
Adjustable front and rear body installs allow a wide array of bodies
    to be utilized including rally automobile bodies
Constructed of nylon, black in color
Screw-on body install system removes metal clips

SUCHES AS:
Front and Rear Body Mounts and Publishes with Mounting Hardware

You will certainly love this product if you have the product just above discussed.

Pinion Gear 16T 48P W/Screw Set

    This is the 16 Tooth 48 Pitch Pinion Equipment from Traxxas.

FEATURES:
Steel building and construction

SUCHES AS:
16 Tooth 48 Pitch Pinion Equipment with set screw

NEEDS:
Installing on motor shaft

SPECIFICATIONS:
Variety of Teeth: 16T
Pitch: 48
Inner Diameter: 0.12" (3mm)

Often gotten with the item that you are presently reading about.

Sealed Receiver Box (Slash)

This is the Receiver Box for the 2WD Traxxas Slash Truck.

FEATURES:
Changes broken receiver boxes
Constructed of black plastic

SUCHES AS:
One top and bottom half receiver box for the Traxxas Slash
Hardware

NEEDS:
Installing receiver and bolting receiver box to chassis.

The below item likewise sets really well with the item being gone over.

Nerf Bars, Chassis (Slash)

These are the replacement Nerf Bars for the 2WD Traxxas Slash.

FEATURES:
Black plastic building and construction

SUCHES AS:
2 Nerf Bars for the Traxxas Slash

NEEDS:
Setup onto Automobile

Want one more wonderful item to enhance the above mentioned item?

Hold Down, Battery Slash

This is the Hold Down Battery Set for the 2WD Traxxas Slash.

FEATURES:
Black nylon building and construction

SUCHES AS:
One Battery Hold Down
One Retainer Hold Down
One Battery Post
One Foam Spacer
One Tilted Body Clip

NEEDS:
Setup on the chassis