Traxxas 1/16 E-Revo Wheelie Bar

This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo.

FUNCTIONS:
Nylon building
Black in color

SUCHES AS:
One Wheelie Bar
One 2x14mm Cap Head Screws
3 2x8mm Cap Head Screws
Instruction Sheet

REQUIRES:
Installation at back of chassis

Want another wonderful item to match the above mentioned item?



This is the Duratrax 19-in-1 Tool Set for Traxxas Vehicles.

FEATURES:
All tools needed for routine upkeep on over a dozen of the
    most popular Traxxas vehicles in addition to many other RC vehicles
Nut motorists, hex motorists, screwdrivers and turnbuckle wrench in
    numerous sizes
Ergonomic ratchet handle
Adjustable bit length
Black nylon zippered carrying case with Duratrax logo

SUCHES AS:
4, 5, 5.5, 7 and 8mm Nut Drivers
1.5, 2, 2.5, 3, 3.5, and 4mm Hex Drivers
#0, #00, #1 Phillips Screwdrivers
2, 3, and 4mm Slotted Head Screwrivers
5, 8mm Turnbuckle Wrench
Ratchet Handle

Several others have actually acquired this item in addition to the item that you are currently reading about.

Body Clip 90 Deg Angled (10) Revo

These are the replacement Body Clips for
the Traxxas Nitro Revo Monster Truck.

FEATURES:
Metal Building
Silver in Color
Bent for Easy Elimination

SUCHES AS:
Ten Bent Silver Metal Body Clips

REQUIRES:
Assembly onto Automobile

Right here is another item that praises the item being reviewed.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Equipment for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building

SUCHES AS:
One Diff Ring Equipment
One Pinion Equipment

REQUIRES:
Installation on the automobile

Frequently acquired with the item that you are currently reading about.

LiPo Onyx 3S 11.1V 1300mAh 25C Soft Case TRA

This is the Duratrax Onyx 11.1V 1300mAh 25C Soft Case LiPo Battery
with the Traxxas Plug.

FEATURES:
Ideal for 1/16 scale vehicle applications
Prewired with Traxxas high existing port

SUCHES AS:
11.1V 1300mAh 25C Soft Case LiPo Battery with Traxxas High Current
    Adapter

REQUIRES:
Balancer and LiPo suitable battery charger or LiPo battery charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 11.1V
Rated Capacity: 1300mAh
Release Rating: 25C constant
Dimensions: 1.2 x 0.7 x 3.5" (31 x 17 x 90mm)
Weight: 3.8oz (108g)
Discharge Lead/Connectors: 14AWG Wires 3.9" (100mm), Traxxas Plug
Stabilizing Adapter: ElectriFly
Watt Hours: 14Wh

COMMENTS:
ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Charge through the "To ESC or "RELEASE" lead
NEVER EVER Trickle Charge
NEVER allow to Release below 2.5V per cell
NEVER disassemble or customize pack circuitry in any way or leak cells
NEVER place on combustible materials or leave ignored throughout
    charging
ALWAYS Charge in a fireproof place
ALWAYS set battery charger's output volts to match battery volts
CONSTANTLY stay out of reach of children
All weights consist of wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm