Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the radiance powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The consisted of TQi 2.4GHz radio system works just with the**
**#6519 receiver and does DECLINE the Docking Base accessory.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic parts to manage wheel spin and steering
    instructions on loose dirt, concrete and even ice and snow. TSM can be
    tweaked or shut off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and carry deal with
Own: 4 wheel
Own Type: Shaft owned, shafts are .71" (18mm) diameter with
    half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high circulation dual stage air filter with 60% more peak
    horse power than the TRX 2.5 engine, EZ-Start electrical starter and
    7.2V battery
Exhaust: Sleek resonator dual chamber aluminum tuned pipeline
Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    guiding servo, might be equipped with the Traxxas Link Wireless
    Module (not consisted of, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (offered independently) into a powerful tuning
    tool
Clutch: 2 shoe composite building and construction
Transmission: Car moving wide ratio two speed, forward just
Ball Bearings: Full set consisted of, rubber sealed bearings utilized in all
    exposed areas
Shocks: 4 GTR inboard installed, maintenance totally free, silicone oil-filled
    tough anodized bodies with TiN shafts
Main Gear: 38 tooth, formed plastic
Gearbox: Sealed front and rear
Bumpers: Flexible molded front and rear tube design
Suspension: Linkage based for long travel and exact tuning
    adjustments and control
Differentials: Maintenance totally free, sealed with silicone X-rings and
    gaskets, restricted slip action can be tuned utilizing different viscosity
    oil
Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented
    steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi terrain, soft substance rubber
    1.6" (42mm) wide, 4.3"
    (109mm) diameter with foam inserts
Wheels: Beadlock design 5-spoke satin chrome surface, 2.2" (56mm)
    external diameter, 3" (76mm) inner diameter, 1.6" (41mm) wide
Body: Traxxas ProGraphix pre-painted and cut with decals used
Bumpers: Front and rear, plastic building and construction
Suspension: Variable progressive two rocker design, suspension travel
    not restricted to length of shocks, ride height, suspension travel
    and progressive rate can be adjusted absolutely independent of each
    other, rubber sealed pivot balls can be adjusted with consisted of tool
    without eliminating seals, steel pivot ball maintaining rings
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the car in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when when viewed from front or behind vehicle
Steering: Ball bearing enhanced with twin high-torque servos driving
    a heavy-duty servo saver
Warranty: Thirty Days guarantee on electronic parts
    Chassis and engine are required devoid of problems at the date of
    purchase before usage. No guarantees are revealed or suggested that
    cover damage triggered by typical usage or wear, or cover or imply
    for how long any chassis or engine part will last before needing
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing guiding servo, one standard servo, 15T clutch
    bell, 38T spur gear, tool set, showed manual, decals, two air
    filter elements, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC charger, additional radiance plug
    and fuel bottle

NEEDS:
Fuel: Traxxas 10%-20% Leading Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECIFICATIONS:
Lorry-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78pound (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) external edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (2nd Gear): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, largest point
Height: 5.5" (139mm)

REMARKS:
The Slayer Pro 2.4GHz is offered in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings utilized in the Slayer Pro are rubber shielded.
The following list consists of the rubber shielded bearings and the
    non-shielded DuraTrax brand name as a cost-effective alternative.
For Replacement Ball Bearings usage: DuraTrax Traxxas
Qty. Size Location Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611