Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the radiance powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The consisted of TQi 2.4GHz radio system is compatible only with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic parts to control wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or switched off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and bring deal with
Own: 4 wheel
Own Type: Shaft driven, shafts are .71" (18mm) diameter with
    half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high circulation double stage air filter with 60% more peak
    horse power than the TRX 2.5 engine, EZ-Start electric starter and
    7.2V battery
Exhaust: Sleek resonator double chamber aluminum tuned pipe
Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    steering servo, might be equipped with the Traxxas Link Wireless
    Module (not consisted of, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (offered individually) into an effective tuning
    tool
Clutch: Two shoe composite building and construction
Transmission: Automobile shifting wide ratio 2 speed, forward only
Ball Bearings: Full set consisted of, rubber sealed bearings used in all
    exposed areas
Shocks: 4 GTR inboard mounted, upkeep complimentary, silicone oil-filled
    difficult anodized bodies with TiN shafts
Main Equipment: 38 tooth, molded plastic
Transmission: Sealed front and rear
Bumpers: Versatile molded front and rear tube design
Suspension: Linkage based for long travel and exact tuning
    adjustments and control
Differentials: Maintenance complimentary, sealed with silicone X-rings and
    gaskets, limited slip action can be tuned utilizing various viscosity
    oil
Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented
    steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi surface, soft substance rubber
    1.6" (42mm) wide, 4.3"
    (109mm) diameter with foam inserts
Wheels: Beadlock design 5-spoke satin chrome surface, 2.2" (56mm)
    outer diameter, 3" (76mm) inner diameter, 1.6" (41mm) wide
Body: Traxxas ProGraphix pre-painted and cut with decals used
Bumpers: Front and rear, plastic building and construction
Suspension: Variable progressive 2 rocker design, suspension travel
    not restricted to length of shocks, flight height, suspension travel
    and progressive rate can be changed absolutely independent of each
    other, rubber sealed pivot balls can be changed with consisted of tool
    without getting rid of seals, steel pivot ball maintaining rings
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the automobile in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when seen from front or behind vehicle
Steering: Ball bearing improved with twin high-torque servos owning
    a durable servo saver
Warranty: 30 day warranty on electronic parts
    Chassis and engine are warranted devoid of problems at the date of
    purchase before usage. No service warranties are revealed or indicated that
    cover damage triggered by normal usage or wear, or cover or suggest
    the length of time any chassis or engine part will last before needing
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing steering servo, one basic servo, 15T clutch
    bell, 38T spur gear, tool set, highlighted manual, decals, 2 air
    filter aspects, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC battery charger, extra radiance plug
    and fuel bottle

NEEDS:
Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECIFICATIONS:
Car-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78pound (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) outer edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Equipment Ratio (1st Equipment): 15.75:1
Equipment Ratio (Second Equipment): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, widest point
Height: 5.5" (139mm)

COMMENTS:
The Slayer Pro 2.4GHz is offered in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings used in the Slayer Pro are rubber shielded.
The following list consists of the rubber shielded bearings and the
    non-shielded DuraTrax brand name as a cost-effective alternative.
For Replacement Ball Bearings usage: DuraTrax Traxxas
Qty. Size Place Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Rear Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Main Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Main Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Main Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611