Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the glow powered, 2.4GHz radio managed,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The consisted of TQi 2.4GHz radio system works just with the**
**#6519 receiver and does DECLINE the Docking Base accessory.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to control wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or shut off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and carry handle
Own: Four wheel
Own Type: Shaft owned, shafts are .71" (18mm) size with
    half shafts and rubber protected stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high flow dual phase air filter with 60% more peak
    horse power than the TRX 2.5 engine, EZ-Start electric starter and
    7.2V battery
Exhaust: Refined resonator dual chamber aluminum tuned pipeline
Fuel Tank: Low profile 5.1oz (150cc) with flip leading cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    guiding servo, might be geared up with the Traxxas Link Wireless
    Module (not consisted of, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (offered individually) into an effective tuning
    tool
Clutch: Two shoe composite building and construction
Transmission: Auto moving broad ratio 2 speed, forward just
Ball Bearings: Complete set consisted of, rubber sealed bearings used in all
    exposed places
Shocks: 4 GTR inboard installed, maintenance complimentary, silicone oil-filled
    tough anodized bodies with TiN shafts
Main Gear: 38 tooth, molded plastic
Transmission: Sealed front and rear
Bumpers: Flexible molded front and rear tube design
Suspension: Linkage based for long travel and accurate tuning
    modifications and control
Differentials: Upkeep complimentary, sealed with silicone X-rings and
    gaskets, restricted slip action can be tuned using different viscosity
    oil
Brakes: Alloy calipers, huge 1.6" (40mm) size drilled and vented
    steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi terrain, soft substance rubber
    1.6" (42mm) broad, 4.3"
    (109mm) size with foam inserts
Wheels: Beadlock style 5-spoke satin chrome surface, 2.2" (56mm)
    external size, 3" (76mm) inner size, 1.6" (41mm) broad
Body: Traxxas ProGraphix pre-painted and trimmed with decals used
Bumpers: Front and rear, plastic building and construction
Suspension: Variable progressive 2 rocker style, suspension travel
    not restricted to length of shocks, trip height, suspension travel
    and progressive rate can be adjusted totally independent of each
    other, rubber sealed pivot balls can be adjusted with consisted of tool
    without eliminating seals, steel pivot ball maintaining rings
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the cars and truck in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when viewed from front or behind automobile
Steering: Ball bearing enhanced with twin high-torque servos owning
    a durable servo saver
Warranty: Thirty Days warranty on electronic components
    Chassis and engine are necessitated devoid of problems at the date of
    purchase prior to usage. No guarantees are expressed or implied that
    cover damage brought on by typical usage or wear, or cover or suggest
    the length of time any chassis or engine part will last prior to requiring
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing guiding servo, one basic servo, 15T clutch
    bell, 38T spur equipment, tool set, highlighted manual, decals, 2 air
    filter aspects, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC charger, additional glow plug
    and fuel bottle

NEEDS:
Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECS:
Lorry-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78lb (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) external edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (Second Gear): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, best point
Height: 5.5" (139mm)

REMARKS:
The Slayer Pro 2.4GHz is offered in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings used in the Slayer Pro are rubber shielded.
The following list includes the rubber protected bearings and the
    non-shielded DuraTrax brand name as a cost-effective alternative.
For Replacement Ball Bearings usage: DuraTrax Traxxas
Qty. Size Area Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Rear Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611