Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the radiance powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The included TQi 2.4GHz radio system is compatible just with the**
**#6519 receiver and does DECLINE the Docking Base accessory.**

FEATURES:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic components to manage wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or turned off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and carry handle
Own: 4 wheel
Own Type: Shaft driven, shafts are .71" (18mm) diameter with
    half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high circulation double stage air filter with 60% more peak
    horse power than the TRX 2.5 engine, EZ-Start electrical starter and
    7.2V battery
Exhaust: Polished resonator double chamber aluminum tuned pipeline
Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    guiding servo, may be equipped with the Traxxas Link Wireless
    Module (not included, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (sold individually) into an effective tuning
    tool
Clutch: Two shoe composite construction
Transmission: Auto moving large ratio 2 speed, forward just
Ball Bearings: Complete set included, rubber sealed bearings utilized in all
    exposed places
Shocks: 4 GTR inboard installed, upkeep complimentary, silicone oil-filled
    difficult anodized bodies with TiN shafts
Main Gear: 38 tooth, molded plastic
Gearbox: Sealed front and rear
Bumpers: Flexible molded front and rear tube design
Suspension: Linkage based for long travel and exact tuning
    changes and control
Differentials: Maintenance complimentary, sealed with silicone X-rings and
    gaskets, minimal slip action can be tuned using different viscosity
    oil
Brakes: Alloy calipers, huge 1.6" (40mm) diameter drilled and vented
    steel rotor and semi-metallic friction product
Tires: BF Goodrich Multi surface, soft compound rubber
    1.6" (42mm) large, 4.3"
    (109mm) diameter with foam inserts
Wheels: Beadlock design 5-spoke satin chrome surface, 2.2" (56mm)
    outer diameter, 3" (76mm) inner diameter, 1.6" (41mm) large
Body: Traxxas ProGraphix pre-painted and trimmed with decals used
Bumpers: Front and rear, plastic construction
Suspension: Variable progressive 2 rocker design, suspension travel
    not restricted to length of shocks, flight height, suspension travel
    and progressive rate can be adjusted absolutely independent of each
    other, rubber sealed pivot balls can be adjusted with included tool
    without removing seals, steel pivot ball retaining rings
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when viewed from the side of the automobile in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when viewed from front or behind car
Steering: Ball bearing enhanced with twin high-torque servos driving
    a durable servo saver
Service warranty: Thirty Days service warranty on electronic components
    Chassis and engine are called for free from flaws at the date of
    purchase prior to use. No service warranties are revealed or implied that
    cover damage brought on by normal use or wear, or cover or indicate
    the length of time any chassis or engine part will last prior to requiring
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing guiding servo, one basic servo, 15T clutch
    bell, 38T spur gear, tool set, highlighted handbook, decals, 2 air
    filter components, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC battery charger, extra radiance plug
    and fuel bottle

NEEDS:
Fuel: Traxxas 10%-20% Leading Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECIFICATIONS:
Car-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78pound (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) outer edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (2nd Gear): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, widest point
Height: 5.5" (139mm)

REMARKS:
The Slayer Pro 2.4GHz is readily available in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings utilized in the Slayer Pro are rubber shielded.
The following list includes the rubber shielded bearings and the
    non-shielded DuraTrax brand as an economical alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Area Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Back Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Back Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Back Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Back Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Back Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Back Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Back Gearbox (1) DTXC1547 (1) TRAC5115
2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611