Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the glow powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The consisted of TQi 2.4GHz radio system works just with the**
**#6519 receiver and does DECLINE the Docking Base device.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms run on
    high-speed electronic elements to control wheel spin and steering
    direction on loose dirt, concrete as well as ice and snow. TSM can be
    tweaked or switched off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and carry deal with
Own: Four wheel
Own Type: Shaft driven, shafts are .71" (18mm) diameter with
    half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high circulation dual phase air filter with 60% more peak
    horse power than the TRX 2.5 engine, EZ-Start electrical starter and
    7.2V battery
Exhaust: Refined resonator dual chamber aluminum tuned pipe
Fuel Tank: Low profile 5.1oz (150cc) with flip leading cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    guiding servo, may be geared up with the Traxxas Link Wireless
    Module (not consisted of, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (offered individually) into a powerful tuning
    tool
Clutch: Two shoe composite construction
Transmission: Car moving broad ratio 2 speed, forward just
Ball Bearings: Complete set consisted of, rubber sealed bearings utilized in all
    exposed locations
Shocks: 4 GTR inboard mounted, upkeep totally free, silicone oil-filled
    hard anodized bodies with TiN shafts
Main Gear: 38 tooth, formed plastic
Transmission: Sealed front and rear
Bumpers: Flexible molded front and rear tube design
Suspension: Linkage based for long travel and precise tuning
    modifications and control
Differentials: Upkeep totally free, sealed with silicone X-rings and
    gaskets, restricted slip action can be tuned using various viscosity
    oil
Brakes: Alloy calipers, huge 1.6" (40mm) diameter drilled and vented
    steel rotor and semi-metallic friction material
Tires: BF Goodrich Multi surface, soft substance rubber
    1.6" (42mm) broad, 4.3"
    (109mm) diameter with foam inserts
Wheels: Beadlock design 5-spoke satin chrome surface, 2.2" (56mm)
    outer diameter, 3" (76mm) inner diameter, 1.6" (41mm) broad
Body: Traxxas ProGraphix pre-painted and cut with decals used
Bumpers: Front and back, plastic construction
Suspension: Variable progressive 2 rocker design, suspension travel
    not limited to length of shocks, flight height, suspension travel
    and progressive rate can be adjusted totally independent of each
    other, rubber sealed pivot balls can be adjusted with consisted of tool
    without eliminating seals, steel pivot ball maintaining rings
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the cars and truck in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when seen from front or behind vehicle
Steering: Ball bearing boosted with twin high-torque servos driving
    a sturdy servo saver
Guarantee: 1 Month service warranty on electronic elements
    Chassis and engine are warranted free from flaws at the date of
    purchase before use. No service warranties are revealed or suggested that
    cover damage caused by typical use or wear, or cover or indicate
    for how long any chassis or engine part will last before requiring
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing guiding servo, one standard servo, 15T clutch
    bell, 38T spur gear, tool set, showed handbook, decals, 2 air
    filter aspects, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC battery charger, extra glow plug
    and fuel bottle

REQUIRES:
Fuel: Traxxas 10%-20% Leading Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECS:
Car-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78lb (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) outer edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Gear Ratio (1st Gear): 15.75:1
Gear Ratio (Second Gear): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, best point
Height: 5.5" (139mm)

REMARKS:
The Slayer Pro 2.4GHz is available in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All initial bearings utilized in the Slayer Pro are rubber shielded.
The following list consists of the rubber shielded bearings and the
    non-shielded DuraTrax brand name as an economical alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Place Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Back Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Back Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Back Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Back Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Back Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Back Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Back Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Stimulate Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611