Traxxas 1/10 Slayer Pro 4x4 4WD Nitro-Power SC RTR TSM

This is the radiance powered, 2.4GHz radio controlled,
Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.

**The included TQi 2.4GHz radio system works just with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms work on
    high-speed electronic elements to control wheel spin and steering
    instructions on loose dirt, concrete as well as ice and snow. TSM can be
    fine tuned or shut off by adjusting the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
    semi-monocoque with integrated roll hoop and carry handle
Drive: Four wheel
Drive Type: Shaft owned, shafts are .71" (18mm) size with
    half shafts and rubber shielded stub axle bearings
Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
    carburetor and high flow double phase air filter with 60% more peak
    horsepower than the TRX 2.5 engine, EZ-Start electrical starter and
    7.2V battery
Exhaust: Refined resonator double chamber aluminum tuned pipe
Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
Radio: Traxxas TQi 2.4GHz high output with digital ball bearing
    guiding servo, might be geared up with the Traxxas Link Wireless
    Module (not included, order TRAC6511) that turns an Android,
    iPad, iPhone or iPod Touch (sold independently) into a powerful tuning
    tool
Clutch: Two shoe composite building and construction
Transmission: Vehicle moving wide ratio 2 speed, forward just
Ball Bearings: Full set included, rubber sealed bearings used in all
    exposed locations
Shocks: 4 GTR inboard installed, upkeep free, silicone oil-filled
    hard anodized bodies with TiN shafts
Main Equipment: 38 tooth, molded plastic
Transmission: Sealed front and rear
Bumpers: Versatile molded front and rear tube design
Suspension: Linkage based for long travel and precise tuning
    adjustments and control
Differentials: Upkeep free, sealed with silicone X-rings and
    gaskets, minimal slip action can be tuned using different viscosity
    oil
Brakes: Alloy calipers, huge 1.6" (40mm) size drilled and vented
    steel rotor and semi-metallic friction product
Tires: BF Goodrich Multi surface, soft substance rubber
    1.6" (42mm) wide, 4.3"
    (109mm) size with foam inserts
Wheels: Beadlock design 5-spoke satin chrome surface, 2.2" (56mm)
    outer size, 3" (76mm) inner size, 1.6" (41mm) wide
Body: Traxxas ProGraphix pre-painted and cut with decals used
Bumpers: Front and back, plastic building and construction
Suspension: Variable progressive 2 rocker design, suspension travel
    not limited to length of shocks, ride height, suspension travel
    and progressive rate can be changed absolutely independent of each
    other, rubber sealed pivot balls can be changed with included tool
    without getting rid of seals, steel pivot ball retaining rings
Caster: Adjustable, caster/toe-in describes the angle of the front
    suspension when seen from the side of the car in relation to the
    chassis
Camber: Adjustable, camber describes the angle of the tops of the
    tires from vertical when when seen from front or behind automobile
Steering: Ball bearing improved with twin high-torque servos owning
    a durable servo saver
Warranty: 1 Month guarantee on electronic elements
    Chassis and engine are necessitated devoid of defects at the date of
    purchase prior to use. No guarantees are expressed or suggested that
    cover damage triggered by normal use or wear, or cover or indicate
    the length of time any chassis or engine part will last prior to needing
    replacement due to wear.

INCLUDES:
Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
    Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/
    digital ball bearing guiding servo, one standard servo, 15T clutch
    bell, 38T spur gear, tool set, highlighted manual, decals, 2 air
    filter aspects, filter oil, engine setup DVD, long travel rocker
    and spring set, TSM, 7.2V battery, 2A DC charger, extra radiance plug
    and fuel bottle

NEEDS:
Fuel: Traxxas 10%-20% Top Fuel
AA Radio Batteries: 8, 4 for transmitter 4 for receiver

SPECIFICATIONS:
Lorry-
Length: 23.54" (598mm)
Width: 11.65" (296mm)
Height: 7.87" (200mm)
Weight: 7.78pound (3.53kg)
Wheelbase: 13.9" (353mm)
Front and Rear Track: 12.68" (322mm) outer edges of tires
Center Ground Clearance: 2.5" (63.5mm)
Equipment Ratio (1st Equipment): 15.75:1
Equipment Ratio (Second Equipment): 10.05:1
    Body-
Length: 21.5" (546mm)
Width: 9.4" (238mm) behind front wheels, narrowest point
11.4 (290mm) at rear wheels, best point
Height: 5.5" (139mm)

COMMENTS:
The Slayer Pro 2.4GHz is available in the following body colors;
    Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
    Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All original bearings used in the Slayer Pro are rubber shielded.
The following list consists of the rubber shielded bearings and the
    non-shielded DuraTrax brand as an affordable alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas
Qty. Size Place Qty Bearing Set Qty Bearing Set
2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
2 5x11mm Front Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Rear Transmission (1) DTXC1547 (1) TRAC5115
2 5x11mm Main Shaft (1) DTXC1547 (1) TRAC5115
1 10x15mm Main Shaft (1) DTXC1595 (1) TRAC5119
1 6x12mm Main Shaft (1) DTXC1569 (1) TRAC5117
1 5x11mm Stimulate Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611