Traxxas 1/10 Nitro Rustler 2WD w/TSM

This is the radiance powered, 2.4GHz radio managed, ready-to-run
    Traxxas Nitro Rustler 1/10 scale Arena Race Truck
with Traxxas Stability Management.

**The consisted of TQ 2.4GHz radio system works just with the**
**#6519 receiver and does NOT accept the Docking Base accessory.**

FUNCTIONS:
Traxxas Stability Management (TSM): Superior tuning algorithms operate on
    high-speed electronic components to manage wheel spin and steering
    direction on loose dirt, concrete and even ice and snow. TSM can be
    tweaked or switched off by changing the multi-function knob on
    the TQi transmitter or the slider in the Traxxas Link app
Chassis: T-6 aluminum anodized blue with fiber composite upper plate/
    front brace
Radio: Traxxas TQ 2.4GHz radio system
Engine: Traxxas 2.5 racing engine with EZ-Start electrical starter,
    slide valve carb, two radiance plugs, air filter and cylinder head
    protector, battery and charger for EZ-Start
Exhaust: Composite tuned pipe with aluminum header
Own: Rear wheel with telescoping U-joint drive shafts
Body: Pre-painted, pre-cut polycarbonate body
Shocks: 4 composite bodied oil-filled
Slipper Clutch: Adjustable
Suspension: 4-wheel independent
Transmission: Ball bearing geared up, Magnum 281
Differential: Planetary gear with steel internal gears
Fuel Tank: 2.5oz (75cc) with flip-top lid and guide bulb
Brake: Composite disc type
Stimulate Gear: Nylon, 70 tooth 32-pitch
Wheels: Chrome 2.0" (51mm) wide, 2.8" (71mm) diameter five-split
    spoke Jato
Tires: Front, ribbed 2.8" (71mm) inner diameter, 2" (51mm) wide
Rear, Traxxas Alias 2.8" (71mm) inner diameter, 2" (51mm) wide
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when seen from the side of the cars and truck in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when seen from front or behind automobile
    suspension when seen from the side of the cars and truck in relation to thei
    chassis

CONSISTS OF:
Put together Nitro Rustler with TRX-2.5 racing engine and radiance plug,
    TSM, EZ-Start electrical starter, painted body with rear wing,
    decals, 2.4GHz radio system, tuned pipe, instruction sheet, additional
    radiance plug, fuel bottle, tools, battery & charger

NEEDS:
"AA" Batteries: 8 (4 for transmitter and 4 for receiver)
Fuel: Vehicle fuel with 10-15% nitromethane material
Misc. Products: Building and track devices

SPECS:
Length: 17-1/4" (438mm)
Front Track: 12-1/2" (318mm)
Rear Track: 12-3/8" (314mm)
Weight: 60 ounces (1701g) without radio
Height: 6" (152mm)
Wheelbase: 11.3" (287mm)
Fuel Capability: 2.5 ounces (75cc)
Engine: TRX 2.5 racing w/EZ Start System
Gear ratio: Adjustable 8.43:1 to 12.64:1
Differential: Planetary gear
Brake: Disc
Chassis: Double-decker (bottom aluminum,top composite)
Stimulate gear: Nylon, 70 tooth 32-pitch
Clutch bell: 20 steel tooth
Caster block: Front 30 degrees

REMARKS:
For Replacement Ball Bearings usage:
    Qty. Size Area Qty. Bearing Set
4 5x11mm Front Wheels 2 DTXC1547
4 5x11mm Back Wheels 2 DTXC1547
6 5x11mm Transmission 3 DTXC1547
2 5x11mm Clutch Bell 1 DTXC1547

Readily available in the following color pattern,
    Blue, TRAD58BB Silver/Blue, TRAD58SB
    Red, TRAD58RR Silver/Red, TRAD58SR

REPLACING EZ STARTER WITH STANDARD RECOIL STARTER
    To transform the EZ starting to a standard pull starter, purchase
    part numbers TRAG5170, TRAP5211 one-way bearing, 4 3x8mm maker
    screws, get the three bolts on the EZ-Starter, clip the wires
    on the EZ-Starter, and set up recoil pullstart.