Top Flite MonoKote Metallic Charcoal 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Inexpensive,
Easy, Clean, when Compared to "old fashioned" Coverings, Quick To Use.

For excellent covering ideas and to insure a professional surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq ft
Dry Adhesive Activates When Heat is Applied
Shrinks to a Drum-Tight End up As It Cools
High Gloss End Up
Fuelproof and Water resistant
Stronger and Lighter Than Traditional Silk and Dope Coverings
Might be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

INCLUDES:
One (6' x 26") Roll of Metallic Charcoal Covering
One Instruction Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote Might
    Vary A little In Color In Between Production Runs of These Products.
If Utilizing 3 or More Rolls of the Same Color, it is Recommended to
    Use a 25' Roll To Make Sure the Same Dye Lot for the Entire
    Model Being Covered.
LustreKote Primer Must Be Utilized With LustreKote Paint to Draw out Its
    True Color.
LustreKote Paint: NONE
MonoKote Trim Sheet: TOPQ4129

MonoKote is a High Temperature Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam, Use the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote may be utilized on top of, but not under MonoKote.)
Temperature level Ranges:
    Attaching to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinkage: 230 - 270°F
    Maximum Shrinkage: 270 - 350°F