Top Flite MonoKote Metallic Blue 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Film that is Inexpensive,
Easy, Clean, and When Compared to "old made" Coverings, Quick To Use.

For terrific covering ideas and to guarantee a professional finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq ft
Dry Adhesive Activates When Heat is Applied
Diminishes to a Drum-Tight Complete As It Cools
High Gloss Finish
Fuelproof and Water resistant
Stronger and Lighter Than Conventional Silk and Dope Coverings
May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Metallic Blue Covering
One Guideline Sheet

REQUIRES:
Sealing Iron (TOPR2100), Heat Weapon (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Various Lots of MonoKote May
    Vary Slightly In Color Between Production Runs of These Products.
If Utilizing 3 or More Rolls of the Exact same Color, it is Recommended to
    Utilize a 25' Roll (TOPQ1402) To Guarantee the Very Same Dye Lot for the Entire
    Model Being Covered.
LustreKote Primer Must Be Used With LustreKote Paint to Draw out Its
    Real Color.
MonoKote Trim Sheet: NONE

MonoKote is a High Temperature Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam, Utilize the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote might be used on top of, however not under MonoKote.)
Temperature level Ranges:
    Attaching to Wood: 215 - 240°F (activating the glue)
    Partial Shrinking: 230 - 270°F
    Maximum Shrinking: 270 - 350°F