Top Flite MonoKote Maroon 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Low-cost,
Easy, Clean, and When Compared to "old fashioned" Coverings, Quick To Use.

For excellent covering concepts and to guarantee a professional surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq ft
Dry Adhesive Triggers When Heat is Applied
Diminishes to a Drum-Tight End up As It Cools
High Gloss End up
Fuelproof and Water resistant
More powerful and Lighter Than Standard Silk and Dope Coverings
May be Cleaned with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Maroon Covering
One Guideline Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

COMMENTS:
Paints, Trim Sheets, EconoKote and Different Lots of MonoKote May
    Vary A little In Color In between Production Runs of These Products.
If Utilizing Three or More Rolls of the Very same Color, it is Recommended to
    Utilize a 25' Roll (TOPQ1213) To Guarantee the Very same Dye Lot for the Entire
    Design Being Covered.
LustreKote Guide Need to Be Utilized With LustreKote Paint to Draw out Its
    True Color.
MonoKote Trim Sheet: NONE

MonoKote is a High Temperature Covering, NOT For Use Directly On Foam
EconoKote IS For Use Directly On Foam, Utilize the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote might be utilized on top of, but not under MonoKote.)
Temperature level Varies:
    Attaching to Wood: 215 - 240°F (activating the glue)
    Partial Shrinkage: 230 - 270°F
    Optimum Shrinkage: 270 - 350°F

Want one more great product to enhance the above pointed out product?



This is a Master Airscrew Injection-Molded Fiberglass Filled Nylon Propeller.
Excellent for Any Type of Application, from
Training and Sport Flying to Major Competition.

FEATURES:
NASA Airfoils and Constant-Pitch Styles allow this Prop to
    provide more Thrust at Lower RPM.
The Latest in Engineering Technology utilized for this Upgraded Design.
Lower Sound and Precise Balance
Offered in a Wide Range of Sizes to Fit Every Application.
Propeller is totally fuel-proof.

CONSISTS OF:
One Black 9x6 Fiberglass/Nylon Prop

SPECIFICATIONS:
Center Hole Size: 1/4" approx.
Propeller Size: 9"
Prop Pitch: 6"

NEEDS:
Depending upon the engine crankshaft size, the prop might need to
    be reamed to a larger size using GPMQ5005 (SAE) or
    GPMQ5007 (Metric).

COMMENTS:
Four-stroke engines are usually greater torque engines and must
    utilize the larger props suggested in the range.
Recommended prop ranges will differ depending on your particular engine
    and airplane.
The Chart below represents average prop usage and must be utilized as
    Only a General Guideline. Always describe the maker's
    directions consisted of with your engine.
Engine Size 2-Stroke 4-Stroke
.049-.051 5.5x4, 5.5x4.5, 6x3, 6x3.5, 6x4 N/A
.09 -.10 7x4, 7x5, 7x6 N/A
.15 7x6, 8x4, 8x5, 8x6, 8x7 N/A
.20 -.25 8x6, 8x7, 9x4, 9x5 9x4, 9x5, 9x6, 9x7
.29 -.35 9x6, 9x7, 9x8, 9.5x6, 10x4, 10x5, 10x6 N/A
.40 9.5x6, 10x4, 10x5, 10x6, 10x8, 10x9 11x6, 12x6
.45 -.50 10x8, 10x9, 11x4, 11x5, 11x6, 11x7, 11x7.5 N/A
.60 11x5, 11x6, 11x7, 11x7.5, 11x8, 11x9 11x8,11x9,12x6,13x6
.71 -.80 12x6, 12x8, 13x6, 13x8, 13x10, 14x8 N/A
.90 13x6, 13x8, 13x10, 14x6, 14x8 11x9,12x8,14x6
1.08 14x8, 14x10, 15x8, 16x6 N/A
1.20 14x8, 15x8, 16x6 14x8,15x8,15x10,16x8
1.5 16x8, 16x10, 18x6, 18x8 N/A
1.8 18x8, 18x10, 20x6, 20x8 N/A
2.1 20x8, 20x10 N/A
2.7 -3.0 22x8, 22x10, 22x12, 24x8, 24x10, 24x12 N/A