Top Flite MonoKote Cream 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Economical,
Easy, Clean, and When Compared to "old fashioned" Coverings, Quick To Use.

For terrific covering ideas and to guarantee a professional surface, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq ft
Dry Adhesive Triggers When Heat is Applied
Diminishes to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Waterproof
Stronger and Lighter Than Traditional Silk and Dope Coverings
Might be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Cream Covering
One Guideline Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Weapon (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Different Great deals of MonoKote Might
    Vary Slightly In Color Between Production Runs of These Products.
If Using 3 or More Rolls of the Very same Color, it is Suggested to
    Utilize a 25' Roll (TOPQ1212) To Make sure the Very same Dye Lot for the Entire
    Model Being Covered.
LustreKote Primer Should Be Used With LustreKote Paint to Draw out Its
    True Color.
MonoKote Trim Sheet: NONE
MonoKote Flat: TOPQ0512
MonoKote is a Heat Covering, NOT For Usage Straight On Foam
EconoKote IS For Usage Straight On Foam, Utilize the Following:
EconoKote Covering: TOPQ2601-TOPQ2612
    (EconoKote might be utilized on top of, but not under MonoKote.)
Temperature level Ranges:
    Attaching to Wood: 215 - 240°F (activating the glue)
    Partial Shrinking: 230 - 270°F
    Optimum Shrinking: 270 - 350°F

Regularly gotten with the product that you are presently reviewing.



This is a Master Airscrew Injection-Molded Fiberglass Filled Nylon Propeller.
Excellent for Any Kind of Application, from
Training and Sport Flying to Severe Competition.

FEATURES:
NASA Airfoils and Constant-Pitch Styles enable this Propeller to
    provide more Thrust at Lower RPM.
The Latest in Engineering Innovation utilized for this Upgraded Design.
Lower Sound and Precise Balance
Readily available in a Wide Range of Sizes to Match Every Application.
Propeller is totally fuel-proof.

CONSISTS OF:
One Black 9x6 Fiberglass/Nylon Propeller

SPECS:
Center Hole Diameter: 1/4" approx.
Propeller Diameter: 9"
Propeller Pitch: 6"

NEEDS:
Depending on the engine crankshaft size, the prop might have to
    be reamed to a larger size using GPMQ5005 (SAE) or
    GPMQ5007 (Metric).

REMARKS:
Four-stroke engines are usually greater torque engines and must
    use the larger props suggested in the range.
Recommended prop ranges will differ depending on your particular engine
    and airplane.
The Chart listed below represents average prop use and should be utilized as
    Only a General Guideline. Always refer to the producer's
    directions included with your engine.
Engine Size 2-Stroke 4-Stroke
.049-.051 5.5x4, 5.5x4.5, 6x3, 6x3.5, 6x4 N/A
.09 -.10 7x4, 7x5, 7x6 N/A
.15 7x6, 8x4, 8x5, 8x6, 8x7 N/A
.20 -.25 8x6, 8x7, 9x4, 9x5 9x4, 9x5, 9x6, 9x7
.29 -.35 9x6, 9x7, 9x8, 9.5x6, 10x4, 10x5, 10x6 N/A
.40 9.5x6, 10x4, 10x5, 10x6, 10x8, 10x9 11x6, 12x6
.45 -.50 10x8, 10x9, 11x4, 11x5, 11x6, 11x7, 11x7.5 N/A
.60 11x5, 11x6, 11x7, 11x7.5, 11x8, 11x9 11x8,11x9,12x6,13x6
.71 -.80 12x6, 12x8, 13x6, 13x8, 13x10, 14x8 N/A
.90 13x6, 13x8, 13x10, 14x6, 14x8 11x9,12x8,14x6
1.08 14x8, 14x10, 15x8, 16x6 N/A
1.20 14x8, 15x8, 16x6 14x8,15x8,15x10,16x8
1.5 16x8, 16x10, 18x6, 18x8 N/A
1.8 18x8, 18x10, 20x6, 20x8 N/A
2.1 20x8, 20x10 N/A
2.7 -3.0 22x8, 22x10, 22x12, 24x8, 24x10, 24x12 N/A