Top Flite MonoKote Black 6'

MonoKote is a Patented, Flexible High-Gloss Polyester Movie that is Affordable,
Easy, Clean, and When Compared to "old fashioned" Coverings, Quick To Use.

For terrific covering concepts and to insure an expert finish, order
the MonoKote Covering Instructional DVD, TOPZ0105.

FEATURES:
Super Strong with a Tensile Strength of 25,000 psi (pounds/sq in)
Lightweight at Only 0.2 oz/sq feet
Dry Adhesive is Triggered When Heat is Applied
Diminishes to a Drum-Tight Finish As It Cools
High Gloss Finish
Fuelproof and Water resistant
More powerful and Lighter Than Conventional Silk and Dope Coverings
May be Cleaned up with Glass Cleaner, "409" or MonoKote Cleaner/Polish

CONSISTS OF:
One (6' x 26") Roll of Black Covering
One Guideline Sheet

NEEDS:
Sealing Iron (TOPR2100), Heat Gun (TOPR2000), Iron Sock (TOPR2175)

REMARKS:
Paints, Trim Sheets, EconoKote and Various Lots of MonoKote May
    Vary Slightly In Color Between Production Runs of These Products.
If Using Three or More Rolls of the Exact same Color, it is Recommended to
    Use a 25' Roll (TOPQ1208) To Guarantee the Exact same Dye Lot for the Entire
    Design Being Covered.
LustreKote Primer Need to Be Utilized With LustreKote Paint to Draw out Its
    True Color.
MonoKote Trim Sheet: TOPQ4109
MonoKote Flat: TOPQ0508
MonoKote is a High Temperature Covering, NOT For Use Straight On Foam
EconoKote IS For Use Straight On Foam, Use the Following:
EconoKote Covering: TOPQ2608-TOPQ2612
    (EconoKote might be used on top of, but not under MonoKote.)
Temperature Varies:
    Attaching to Wood: 215 - 240°F (triggering the glue)
    Partial Shrinking: 230 - 270°F
    Maximum Shrinking: 270 - 350°F

The below product also sets actually well with the product being discussed.



Turn scrap MonoKote (or any covering) into perfectly matched and perfectly
sized stripes. Leading Flite's Smart Stripe Cutting Tool removes the need for
ever having to purchase striping tape again!
NOTE-THE BLADES ARE TAPED TO THE COVER OR BOTTOM FOR SAFETY.

FEATURES:
Makes fuelproof stripes that stick and stay stuck
Innovative cutting mechanism tracks perfectly straight and precision
    stainless steel change enables micro-fine width control
Makes stripes as narrow as 1/64", as large as 5-1/4"
Comes with one #11 blade, but might also utilize #10 and #12 blades
5-year minimal service warranty

CONSISTS OF:
One Smart Stripe Cutting Tool
One #11 Blade
One Photo-Illustrated Guideline Sheet with Part Number Listing.

COMMENTS:
Replacement Parts: Roller: TOPR2425
Blades: HCAR0211
OTHER REPLACEMENT PARTS AVAILABLE THROUGH EXCELLENT PLANES DIRECTLY.
2-
strp002 upright 1- strp001 base
1-
strp003 left blade holder 1-
scrw030 1/4-20x1" hex head bolt
1-
strp004 right blade holder 1-
strpp01 instructions
1-
nylon107 threaded insert 1-
strpd01 decal
1-
hrdwd023 wood roller
1-
metal068 dead pin
1-
scrw106 1/4-20 roller knob
1-
scrw105 1/4-32x8" threaded shaft
1-
knob001 knob for threaded shaft
2-
scrw107 4-40x3/4" screw w/ knob
2-
scrw102 6-32x1/4"
1-
blade08 #11 blade
2-
nuts002 4-40 hex nut
1-
nylon108 1/4" unthreaded nylon hex nut
4-
scrw047 #6x1/2' sheet metal screw
2-
wshr005 #4 flat washer