Top Flite Cessna 182 Skylane Gold Edition .60 Size ARF

This is the radio controlled, radiance or electrical powered, nearly ready to fly
Top Flite Cessna Skylane Gold Edition Airplane.
IMAA Legal

FUNCTIONS:
Building: Balsa and ply
Wings: One-piece with plywood wing joiner
Aileron Control: Dual servo
Covering: Top Flite MonoKote
Cowl: Painted fiberglass
Cockpit Information: Seats and instrument panel
Lights: Two landing lights in cowl, one navigational light on each
    wing and red MARS beacon light on top of fin (needs separate
    receiver battery)
Spinner: Sleek aluminum, 2.25" (57mm) diameter
Landing Equipment: Main, two piece fiberglass, Nosegear 0.20" (5mm)
    diameter prebent wire
Wheel Pants: Constructed of fiberglass, white in color
Wheels: 3 foam, two primary 3.25" (82mm) diameter, one nosewheel

Engine Mount: Two-piece composite
Fuel Tank: 14oz (420cc)
Structure Time: Ready to fly in 15-20 hours
Service warranty: Top Flite® Designs warranties this kit to be devoid of
    problems in both material and workmanship at the date of purchase.
    This service warranty does not cover any component parts harmed by utilize or
    adjustment. In no case shall Top Flite's liability exceed the
    initial expense of the bought kit.

INCLUDES:
Top Flite Cessna Skylane Gold Edition Aircraft with decals, all
    hardware, clear plastic windscreen and side glass, fiberglass tail
    cone, engine mount, cowl, three wheels, instruction manual and
    wheel trousers

NEEDS:
Engine: .60-.91 cu in (10-15cc) two-stroke OR
.91-1.20 cu in (15-20cc) four-stroke OR
Motor: Rimfire 120 (50-65-450) Outrunner
LiPo Batteries: Two connected in series if using electrical motor
Radio: 6-channel
Servos: Six requirement with a minimum of 44oz/in (3.2kg/cm) torque
24" (610mm) Servo Extensions: Two for ailerons
12" (305mm) Servo Extensions: Six for ailerons, flaps and wing tip
    lights
Y Harnesses: Two for aileron and flap surface areas
Receiver Loads: 1000mAh minimum and 600mAh pack for flying lights

SPECS:
Wingspan: 81 in (2060mm)
Wing Area: 898 sq in (57.9 dm2)
Weight: 11.5 - 12.5pound (5220 - 5670g)
Wing Loading: 30 - 32 oz/sq feet (92 - 98 g/sq dm)
Length: 64 in (1630mm)
Airfoil: Semi-symmetrical
CG (Center of Gravity): 4-5/16" (110mm) back from the leading edge of
    the wing
Control Throws- Low Rate High Rate
    Elevator: 3/4" (19mm) 10° 1-1/16" (27mm) 15°
    Rudder: 5/8" (16mm) 9° 1" (25mm) 15°
    Ailerons: 1/2" (13mm) 14° 5/8" (16mm) 17°
    Flaps: 1/2 - 1" (25mm) 18° down
full - 2" (51mm) 36° down

COMMENTS:
Following are the Top Flite MonoKote colors utilized to cover this design
    and order numbers for 6ft rolls;
Jet White TOPQ0204 Sapphire Blue TOPQ0226
Dove Gray TOPQ0211 Black TOPQ0208

If a replacement fuel tank is required, order the Sullivan 14oz
    tank (SULQ1742), or the DuBro 14oz tank (DUBQ0214).
    Some small cutting and adjustments may be required.

If scale nosegear wanted, Robart Fixed Steerable Nosegear (ROBQ1707)
    is good match.