Thunder Tiger Metal Tail Pitch Slider Raptor G4/E820

This is a replacement Thunder Tiger Tail Pitch Slider Set, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

This item compliments the main item right here.



This is a replacement Thunder Tiger Canopy Bracket, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

You will certainly like this item if you have the item above mentioned.



This is a replacement Thunder Tiger Canopy Spacer, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

The listed below item also pairs truly well with the item being talked about.

Autorotation Gear 108T Raptor G4/E820

This is a replacement Thunder Tiger 108 Tooth Autorotation Equipment, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

Many others have acquired this item together with the item that you are presently reading about.



This is the Front Tail Bevel Equipment Set for the
Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Constructed of nylon

INCLUDES:
2 Front Tail Bevel Gears with Pin and Set Screw

REQUIRES:
Installing in heli following instructions in handbook

Many others have acquired this item together with the item that you are presently reading about.



These are the Tail Control Rods for the
Thunder Tiger Raptor 90G4 Heli Series.

FEATURES:
Metal building and construction

INCLUDES:
2 Tail Control Rods with Mounting Hardware

This is a superb addition to the item presently being talked about.



This is a replacement Thunder Tiger 67.5mm Repaired Linkage Rod Set, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

Right here is an additional item that compliments the item being talked about.



This is a replacement Thunder Tiger 74.5mm Repaired Linkage Rod Set, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

This is a superb addition to the item presently being talked about.

Carbon Tail Support Set, E700

This is the Tail Support Set for the Thunder Tiger Raptor 90G4 Heli Series.

FEATURES:
Constructed of carbon for strength and lightweight

INCLUDES:
2 Carbon Tail Supports with Installing Hardware

Right here is a fantastic item that several others have purchased the exact same time.



This is the Gyro Tray for the Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Plastic building and construction, black in color

INCLUDES:
Gyro Tray

REQUIRES:
Installing in heli following instructions in handbook

This item compliments the above talked about item.



This is the set of 3D Flybarless Rotor Grip Levers for the
Thunder Tiger E320 Heli, TTRE0095.

FEATURES:
Sleek natural surface aluminum

INCLUDES:
2 3D Flybarless Rotor Grip Levers
4 3x5mm Screws

Want an additional fantastic item to enhance the above discussed item?

Pv1609 Bearing 15X28x7 G4

This is a replacement Thunder Tiger 15x28x7mm Bearing Set, and is intended for use with the Thunder Tiger Raptor G4 Helicopters.

Right here is an additional item that compliments the item being talked about.



These are the M3x8 Torx Screws utilized on the Thunder Tiger Raptor G4 Heli Series

FEATURES:
Steel building and construction, polished weapon metal gray in color

INCLUDES:
Twenty M3x8 Torx Screws

REQUIRES:
2mm hex wrench, GPMR8011

SPECIFICATIONS:
Length: 8mm
Diameter: 3mm

You will certainly like this item if you have the item above mentioned.



This is the Tail Support Bracket for the
Thunder Tiger Raptor 90G4 Helicopter Series.

FEATURES:
Constructed of aluminum

INCLUDES:
Tail Support Bracket with three Socket Head Cap Screws

REQUIRES:
Installing on tail boom following instructions in handbook