Tekno RC 8000 EB48.4 1/8 Competition Electric Buggy Kit

**Additional Technical Info Will Be Included When It Appears.**
This is the 1/8 scale Electric Powered, Radio Controlled
EB48.4 Competition Buggy Kit.

FEATURES:
Chassis: 7075 aluminum 0.16" (4mm) thick
Own: 4 wheel, front and rear universal driveshafts, tapered
    aluminum center driveshaft
Differentials: Three fluid filled adjustable
Shocks: Oil-filled with CNC machined aluminum bleeder shock caps
    that can be utilized to construct vented or non-vented shocks (optional
    bladders required for non-vented shocks), 4mm steel shafts,
    CNC 4×1.9 Flat/Flat Delrin Pistons, and CNC Delrin Guides, new low
    frequency shock springs, high clamping spring perches with
    caught shock boots
Steering: Revised geometry and Ackermann plate, reaction and
    sturdiness improved with new bearing supported spindles and spindle
    providers, lowered wheel balanced out for much better efficiency in corners
    adjustable Ackermann and bump-steer, Ackermann refers to the impact
    of the inner front wheel rotating much faster that the outer front wheel
    during turns, optional strong right bell crank for increased
    reaction
Body: Clear polycarbonate, fighter jet motivated with more internal
    clearance, small rear spoilers increase downforce, with with
    adjustable low center of mass light-weight install
Suspension: Revised large rear pivot suspension geometry
Motor Mount: 2-piece CNC aluminum with double clamping equipment mesh
    adjustment, direct-to-diff installing
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when seen from the side of the car in relation to
    the chassis
Camber: Adjustable front and back, camber refers to the angle of the
    tops of the tires from vertical when seen from front or behind
    lorry

INCLUDES:
EB48.4 Competition Buggy Kit with Clear Body, Shocks, Decals and
    User's manual

REQUIRES:
Radio: 2-channel with high-torque steering servo (a minimum of 300oz-in)
Motor and ESC System: For 1/8 scale buggy
Tires and Wheels: For 1/8 scale buggy
Pinion Gear: MOD1 15-25 tooth pinion (TKR4175-TKR4185)
LiPo Battery: 4-6S (FOUR a minimum of 5000mAh)
Battery Battery charger, Charging Bag, Paint, CA Glue, tools, building and
    track equipment

SPECS:
Vehicle-
Length: 17.1" (435mm) without wing
Width: 12 - 12.2"* (306-310mm*) *optional hubs required
Weight: 7.0lbs (3200g)
Internal Gear Ratio: 3.33:1
Diff Ratio: F/R - 12/40t, center 44t
Battery Tray Dimensions: 1.97x5.8" (50x148mm) 2x2s or 1x4s config
    Body-
Length:
Width:
Height:

COMMENTS:
For Replacement Ball Bearings usage:
Qty. Size Location Qty. Bearing Set