Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery adapter set with wire.

FEATURES:
These are the white plastic male/female connectors more frequently
called Kyosho/Tamiya connectors. They likewise feature the wire
installed in the connector.

SPECS:
The wire needs to balance about 3"-4" long. The wires are not the same
length.

INCLUDES:
A Kyosho battery adapter with wire.
A Tamiya battery adapter with wire.

WAJ
11/21/93

Frequently purchased with the thing that you are currently reviewing.



This is a low-resistance, compact-size 2-Pin Ultra Plug Adapter from Deans.
This design gets rid of the possiblility of reverse polarity connections.
Provides a safe connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering connectors onto wires

Frequently purchased with the thing that you are currently reviewing.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Adapter
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Supplies a safe connection for battery and motor connections

CONSISTS OF:
2 2-Pin Male Ultra Plug
Four short pieces of Black shrink tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This is a wonderful addition to the thing currently being talked about.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Charger w/Tamiya adapter and is intended for use with 7.2V NiCd Stick Battery Loads.  Approximate charge time might be anywhere from 2-4 Hours depending on battery capability.  This charger is NOT recommended for charging NiMh Cells, or 7.2V batteries to be used for racing.  We advise that you get an excellent peak charger instead for that purpose. 

You will certainly enjoy this item if you have the item earlier discussed.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Vehicle Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.
These are created for use on R/C cars.

INCLUDES:
(4) Nuts

SPECS:
Diameter: 2.5mm

Get this thing to boost the one you read about.



This is the Male and Female 2 Pin Battery Adapter
used on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic adapter
3 inches of wire

CONSISTS OF:
One male end
One female end

NEEDS:
Soldering to choosen accessory

SPECS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This thing compliments the main item here.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Supplies a safe connection for battery and motor connections on
    R/C cars

CONSISTS OF:
2 WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

NEEDS:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end use WSDM1302
For both Male and Female use WSDM3001