Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery adapter set with wire.

FEATURES:
These are the white plastic male/female adapters more typically
called Kyosho/Tamiya adapters. They likewise have the wire
set up in the connector.

SPECS:
The wire should balance about 3"-4" long. The wires are not the exact same
length.

INCLUDES:
A Kyosho battery adapter with wire.
A Tamiya battery adapter with wire.

WAJ
11/21/93

Regularly gotten with the item that you are presently reading about.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design eliminates the possiblility of reverse polarity connections.
Provides a safe connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering adapters onto wires

Regularly gotten with the item that you are presently reading about.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design eliminates the possiblility of reverse polarity
connections
Provides a safe connection for battery and motor connections

SUCHES AS:
Two 2-Pin Male Ultra Plug
4 short pieces of Black diminish tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This is a fantastic enhancement to the item presently being talked about.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Battery charger w/Tamiya adapter and is meant for use with 7.2V NiCd Stick Battery Loads.  Approximate charge time might be anywhere from 2-4 Hours depending on battery capability.  This charger is NOT advised for charging NiMh Cells, or 7.2V batteries to be used for racing.  We advise that you get a great peak charger rather for that function. 

You will certainly love this thing if you have the thing above discussed.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Car Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.
These are developed for use on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 2.5mm

Get this item to improve the one you are reading around.



This is the Male and Female Two Pin Battery Port
used on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic adapter
Three inches of wire

SUCHES AS:
One male end
One female end

NEEDS:
Soldering to choosen device

SPECIFICATIONS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This item praises the main item below.

Ultra Plug, Female (2Pk)

These are two W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Provides a safe connection for battery and motor connections on
    R/C automobiles

SUCHES AS:
Two WS Deans 2-Pin Female Ultra Plug Connectors with area of
    diminish tubing

NEEDS:
Soldering adapters onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001