Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery port set with wire.

FEATURES:
These are the white plastic male/female connectors more commonly
called Kyosho/Tamiya connectors. They likewise feature the wire
installed in the connector.

SPECS:
The wire should balance about 3"-4" long. The wires are not the very same
length.

INCLUDES:
A Kyosho battery port with wire.
A Tamiya battery port with wire.

WAJ
11/21/93

Regularly acquired with the thing that you are presently reading about.



This is a low-resistance, compact-size 2-Pin Ultra Plug Port from Deans.
This design eliminates the possiblility of reverse polarity connections.
Provides a secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering connectors onto wires

Regularly acquired with the thing that you are presently reading about.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Port
from Deans.

FEATURES:
This design eliminates the possiblility of reverse polarity
connections
Provides a secure connection for battery and motor connections

CONSISTS OF:
2 2-Pin Male Ultra Plug
Four brief pieces of Black shrink tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

COMMENTS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This is a great enhancement to the thing presently being reviewed.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Charger w/Tamiya port and is meant for use with 7.2V NiCd Stick Battery Packs.  Approximate charge time could be anywhere from 2-4 Hours depending on battery capacity.  This battery charger is NOT suggested for charging NiMh Cells, or 7.2V batteries to be used for racing.  We advise that you get an excellent peak battery charger rather for that function. 

You will certainly like this product if you have the product above mentioned.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Vehicle Line (Metric).

FEATURES:
Zinc plated, steel metric hex nuts.
These are created for use on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Diameter: 2.5mm

Get this thing to boost the one you read about.



This is the Male and Female 2 Pin Battery Port
used on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic port
3 inches of wire

CONSISTS OF:
One male end
One female end

NEEDS:
Soldering to choosen device

SPECIFICATIONS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This thing praises the main item below.

Ultra Plug, Female (2Pk)

These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Provides a secure connection for battery and motor connections on
    R/C automobiles

CONSISTS OF:
2 WS Deans 2-Pin Female Ultra Plug Connectors with area of
    shrink tubing

NEEDS:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001