Tamiya 7.2V Connector Set 58181

This is a Kyosho/Tamiya battery adapter set with wire.

FEATURES:
These are the white plastic male/female ports more typically
called Kyosho/Tamiya ports. They likewise include the wire
set up in the connector.

SPECS:
The wire must average about 3"-4" long. The wires are not the same
length.

INCLUDES:
A Kyosho battery adapter with wire.
A Tamiya battery adapter with wire.

WAJ
11/21/93

Frequently acquired with the product that you are presently checking out.



This is a low-resistance, compact-size 2-Pin Ultra Plug Adapter from Deans.
This design gets rid of the possiblility of reverse polarity connections.
Provides a protected connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering ports onto wires

Frequently acquired with the product that you are presently checking out.



This is a low-resistance, compact-size Male 2-Pin Ultra Plug Adapter
from Deans.

FEATURES:
This design gets rid of the possiblility of reverse polarity
connections
Offers a protected connection for battery and motor connections

SUCHES AS:
2 2-Pin Male Ultra Plug
Four brief pieces of Black diminish tubing

NEEDS:
Soldering to wire
Soldering Iron, HCAR0775

REMARKS:
For Female end use WSDM1303
For both Male and Female use WSDM3001

This is a amazing addition to the product presently being discussed.



This is a Racers Edge 110V 7.2V 800mAh NiCd Wall Mount Battery Battery charger w/Tamiya adapter and is planned for use with 7.2V NiCd Stick Battery Loads.  Approximate charge time could be anywhere from 2-4 Hours depending on battery capability.  This battery charger is NOT advised for charging NiMh Cells, or 7.2V batteries to be utilized for racing.  We recommend that you get a great peak battery charger rather for that purpose. 

You will certainly love this thing if you have the thing above stated.

2.5Mm Steel Hex Nuts Metric(4)

These are 2.5mm Hex Nuts from Du-Bro's Car Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.
These are developed for use on R/C cars.

INCLUDES:
(4) Nuts

SPECS:
Diameter: 2.5mm

Get this product to enhance the one you are reading around.



This is the Male and Female 2 Pin Battery Adapter
utilized on the DuraTrax Mini Quake and the Vendetta.

FEATURES:
Red plastic adapter
Three inches of wire

SUCHES AS:
One male end
One female end

NEEDS:
Soldering to choosen device

SPECS:
Length: 100mm (4")
Width: 9mm (5/16")
Height: 8mm (1/4")

This product compliments the main item below.

Ultra Plug, Female (2Pk)

These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Eliminates the possibility of reverse polarity connections
Low resistance, compact size
Offers a protected connection for battery and motor connections on
    R/C cars

SUCHES AS:
2 WS Deans 2-Pin Female Ultra Plug Connectors with area of
    diminish tubing

NEEDS:
Soldering ports onto wires
Soldering iron HCAR0776
Solder STAR2000

REMARKS:
For Male end use WSDM1302
For both Male and Female use WSDM3001