Suppo Model 1400Kv Brushless Outrunner Motor, 3.17MM Shaft, 3.5MM Bullet Con

LI-Poly Cell:2-3
Ni-MH Cells: 6-10
RPM/V: 1250Kv
Max. efficiency existing: 6-12 Amp
NoLoad current / 0.7 Amp
Present capacity: 16 A/60 s
Max. Performance: 75%
Shaft size: 3mm
Weight with cables: 47g
Dimensions(mm): 27.5x30

Advised Model Weight: 300 - 800 g
Recommended Prop w/o Gearbox: 7 cells (2xLi) 9."x5; 8 cells 9x5; 10 cells 8.5x6; 3xLi 8x4

Many others have gotten this thing together with the thing that you are presently checking out.

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") plane propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass for
    higher output and longer life.
Reinforcing carbon fibers assist maintain real, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring direction sheet

NEEDS:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 8"
Pitch: 3.8

REMARKS:
Slo-Flyer props are Not developed for Glow engines

Get this thing to enhance the one you read around.

8x6EP Thin Electric Pusher Propeller

This is a 8x6EP Thin Composite Propeller from Advanced Precision Composites.
For utilize on electrical powered airplane only (not for glow engines).

FUNCTIONS:
Gray composite building and construction
Includes five adapter rings that adapt to different motor shafts.

INCLUDES:
One 8x6EP Thin Electric Propeller

NEEDS:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 8"
Pitch: 6
Center inner size: 0.25" (6.3mm)

This thing praises the above talked about thing.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Equipment Type : All Nylon Equipment
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging content:
1 x 9g TITAN Servo Sets (with devices)

You will like this product if you have the product just above stated.

10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") plane propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass for
    higher output and longer life.
Reinforcing carbon fibers assist maintain real, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring direction sheet

NEEDS:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 10"
Pitch: 4.7

REMARKS:
Slo-Flyer props are Not developed for Glow engines