Spektrum IC3 Battery Lead to 4mm Female Bullet

Specifications

Accessory Type: Adapters & Adapters

Connector Type: IC3

Here is a great thing that several others have actually purchased the very same time.



Specifications

Application: UMX 2S Airplanes

Battery Type: LiPo (3.7V per cell)

Battery Voltage: 7.4V

Capacity: 280mAh

Charge Security Circuitry: No

Adapter Type: PH

Release Lead Length: 2 in (50mm)

Difficult Case: No

Optimum Continuous Discharge Current: 8.4A

Optimum Continuous Discharge Rate: 30C

Number of Cells: 2

Item Height: 0.5 in (13mm)

Item Length: 1.5 in (39mm)

Item Weight: 0.6 oz (16.9g)

Item Width: 0.8 in (20mm)

Several others have actually bought this thing in addition to the thing that you are currently checking out.



Specifications

Part Type: Electronic Devices

Here is a great thing that several others have actually purchased the very same time.

EC5 Battery Connector (2)

Key Includes


Capable of more than 120A constant existing with 10-awg wire

Ergonomically pleasing and simple to grip

Protected to prevent shorting and reverse polarity

Superior technology matched to today's sophisticated applications

Designed with benefit and dependability in mind





Overview

E-flite's premium EC5 connectors must be a staple for every workbench. EC5 (E-flite Adapter 5mm) connectors, leads with connectors, and accessories are best for electrical power applications and deal with any battery, battery charger, ESC, Power Meter, and so on. They are ideal for high power applications.



Specifications

Accessory Type: Adapters & Adapters

Connector Type: EC5

You will enjoy this product if you have the product above stated.

Parallel Charging Board for UMX Batteries

Charge twelve UMX / Blade 130X lipos at the very same time!


This brand-new paraboard permits you to charge up to twelve lipos with UMX-style connectors at the same time. Because it charges in parallel, you can charge as few as one or as lots of as twelve batteries of differing capabilities at the very same time.
Perfect for batteries utilized in the Blade 130 X, mCP X BL, UMX Beast, Mig, Carbon Cub, and Sbach 342!

HOW TO USE IT

Just connect the banana plugs and JST-XH balance results in your six lipo battery charger, plug in the batteries you want to charge to the paraboard, program your battery charger and charge!
The paraboard permits you to connect as much as 12 batteries in parallel so that you can charge them as a single bigger mA two-cell battery (i.e. 2s12p). The only requirement is that all the batteries be within .10 of a volt of each other prior to charging. For example, if you either time your flights or fly till cutoff. You want to prevent connecting a fully charged battery to a group of discharged cells, because a rapid rush of existing would occur.

Calclulate your charge rate by adding together the mAh of all the batteries you intend to charge. To charge your batteries at a 1C rate, divide your combined mAh by 1,000 and this will inform you what your amperage setting must be. e.x. (6) 7.4V 300mAh batteries would be: (6 * 300) = 1800 / 1000 = 1.8A


Maximum charge rate = 10A