Spektrum IC3 Battery Lead to 4mm Female Bullet

Requirements

Accessory Type: Adapters & Adapters

Connector Type: IC3

Below is a terrific thing that numerous others have purchased the exact same time.



Requirements

Application: UMX 2S Airplanes

Battery Type: LiPo (3.7V per cell)

Battery Voltage: 7.4V

Capability: 280mAh

Charge Security Circuitry: No

Adapter Type: PH

Release Lead Length: 2 in (50mm)

Difficult Case: No

Optimum Constant Discharge Current: 8.4A

Optimum Constant Discharge Rate: 30C

Number of Cells: 2

Product Height: 0.5 in (13mm)

Product Length: 1.5 in (39mm)

Product Weight: 0.6 oz (16.9g)

Product Width: 0.8 in (20mm)

Numerous others have acquired this thing along with the thing that you are presently reading about.



Requirements

Part Type: Electronics

Below is a terrific thing that numerous others have purchased the exact same time.

EC5 Battery Connector (2)

Secret Includes


Efficient in more than 120A continuous current with 10-awg wire

Ergonomically pleasing and simple to grip

Secured to avoid shorting and reverse polarity

Superior technology fit to today's advanced applications

Developed with convenience and reliability in mind





Overview

E-flite's high-quality EC5 adapters need to be a staple for each workbench. EC5 (E-flite Adapter 5mm) adapters, leads with adapters, and devices are best for electric power applications and deal with any battery, battery charger, ESC, Power Meter, and so on. They are perfect for high power applications.



Specifications

Accessory Type: Adapters & Adapters

Connector Type: EC5

You will certainly enjoy this product if you have the product earlier mentioned.

Parallel Charging Board for UMX Batteries

Charge twelve UMX / Blade 130X lipos at the same time!


This new paraboard allows you to charge up to twelve lipos with UMX-style adapters at the same time. Since it charges in parallel, you can charge as few as one or as many as twelve batteries of differing capacities at the same time.
Perfect for batteries utilized in the Blade 130 X, mCP X BL, UMX Monster, Mig, Carbon Cub, and Sbach 342!

HOW TO USAGE IT

Simply link the banana plugs and JST-XH balance leads to your 6S lipo battery charger, plug in the batteries you'd like to charge to the paraboard, program your battery charger and charge!
The paraboard allows you to link up to 12 batteries in parallel so that you can charge them as a single larger mA two-cell battery (i.e. 2s12p). The only requirement is that all the batteries be within .10 of a volt of each other prior to charging. For example, if you either time your flights or fly till cutoff. You want to avoid connecting a completely charged battery to a group of discharged cells, considering that a quick rush of current would occur.

Calclulate your charge rate by adding together the mAh of all the batteries you plan to charge. To charge your batteries at a 1C rate, divide your combined mAh by 1,000 and this will inform you what your amperage setting need to be. e.x. (6) 7.4V 300mAh batteries would be: (6 * 300) = 1800 / 1000 = 1.8A


Maximum charge rate = 10A