Spektrum Firma 8A Sensored Brushless Smart ESC / Motor Combo: 1/24 Rock C

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Introduction
The Spektrum™ Firma™ 1/24th Brushless ESC + Motor Combination is a fantastic choice for micro crawlers and more operating on two LiPo power. It features a high-precision magnetic encoder and rotor position sensing unit that provides outstanding 1 to 1 control feel when driving at any speed and at any angle. Perfectly suited for trail driving and rock crawling competitors. This improvement in sensored motor control allows the ESC to match the throttle input to the motors RPM with unmatched precision. This combination is specifically developed for the Axial® SCX24 & AX24 platform to provide the supreme efficiency for optimal power and realism. Preinstalled with 2mm bullet connectors for simple installation.





Features

Reliable 4500Kv Sensored Brushless Motor with outstanding sluggish speed control and smooth operation

Drop-in conversion to all Axial 1/24th Scale SCX24 & AX24 RTR vehicles.

*Note: Axial SCX24 vehicles equipped with HRZ00014 2-in1 Receiver and HRZ00015 transmitter requires an SLT3 Transmitter and receiver upgrade for performance. Please describe the handbook for additional information. (2021 Ford Bronco, Jeep GT Gladiator, and Jeep Wrangler will need this upgrade)

All included – includes motor, ESC, sensing unit wire and pinion gears

Crawler Mode: Forward and immediate reverse with drag brake

8 Amp (40 Amp Burst) 1-2S Suitable ESC

Compact Size and All Set to Set up

JST PH 2.0 port to fit the Dynamite 7.4V 350mAh Two Lipo Battery





 






DROP-IN UPGRADE FOR AXIAL SCX24 & AX24 VEHICLES
The Spektrum Firma 1/24th Scale Sensored Brushless motor and ESC provides Axial SCX24 & AX24 lover with a drop-in motor & ESC system to take their crawling to the next level.
 



ALL-INCLUDED
System includes motor, ESC, sensing unit wire and pinion gears and is preinstalled with 2mm bullet connectors and JST PH 2.0 battery port to fit the Dynamite 7.4V 350mAh Lipo battery included with the Axial SCX24 & AX24 vehicles.
 



Requirements

Automobile Cutoff: Yes

BEC: Yes

Brakes: Integral with ESC

Connector Type: PH 2.0 (High-Current Ultra Micro)

ESC Type: Brushless Sensored

Forward: Yes

Input Voltage: 1 - two LiPo

Low-Voltage Cutoff Programmable: No

Maximum Burst Current: 40A

Maximum Constant Existing: 8A

Motor Type: Brushless Sensored

Number of Poles: 2

Output Connector: 2mm Bullet

Overload Defense: Yes

Reverse: Yes

RPM/Volt (Kv): 4500

Sensored: Yes