Spektrum 25/200/600mW Adjustable Power Video Transmitter

Introduction

Introduction

FPV flyers searching for a little feature rich video transmitter will discover the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an integrated microphone, and an effective frequency management tool constructed right into Spektrum innovation.* Changing the band, channel and power level can be dealt with from 2 push howevertons on the circuit board, but much of the time those will only be booked for backup. The Spektrum integrated frequency control system lets a pilot make all the modifications for an FPV system straight from the transmitter.
All FPV pilots can take advantage of remote frequency control. Imagine eliminating those annoying dip switches or buttons. Imagine altering the frequencies before a race without having to take the designs off the beginning grid. Imagine the installing options that are opened up without the restraints of requiring physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power straight from compatible Spektrum transmitters. Pilots can likewise turn the video transmitter off or run at a very low power setting for test purposes, that makes the VT1000 ideal for complex jobs needing a lot of time screening on the bench.
The VT1000 can be connected to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it has to connect with the receiver system is to “Y” off the serial signal wire. An MMCX port for the antenna is used on the circuit board for toughness and lightweight. Installing holes in the circuit board allow simple installing with typical plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are included. A 5.8GHz antenna with SMA or MMCX port is needed, not included.
*All Spektrum Airware based transmitters work with the Spektrum frequency control system with the most recent firmware updates. If your transmitter does not include the VTX menu it may be required to register your transmitter at SpektrumRC.com and update the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license needed for use in The United States and Canada. Please consult the ARRL for additional information about your local amateur radio club and getting your HAM license. www.ARRL.org