Spektrum 25/200/600mW Adjustable Power Video Transmitter

Summary

Summary

FPV flyers searching for a little function rich video transmitter will discover the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an incorporated microphone, and a powerful frequency management tool built right into Spektrum innovation.* Changing the band, channel and power level can be managed from two push howevertons on the circuit board, but much of the time those will only be reserved for backup. The Spektrum incorporated frequency control system lets a pilot make all the adjustments for an FPV system straight from the transmitter.
All FPV pilots can take advantage of remote frequency control. Imagine getting rid of those annoying dip switches or buttons. Imagine changing the frequencies prior to a race without needing to take the models off the starting grid. Imagine the installing choices that are opened up without the restrictions of requiring physical access to the video transmitter. Select the band and channel you want to fly on and set the output power straight from suitable Spektrum transmitters. Pilots can also turn the video transmitter off or perform at an extremely low power setting for test functions, that makes the VT1000 ideal for complicated jobs needing a lot of time screening on the bench.
The VT1000 can be linked to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it needs to connect with the receiver system is to “Y” off the serial signal wire. An MMCX connector for the antenna is utilized on the circuit board for durability and lightweight. Installing holes in the circuit board enable simple installing with typical plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are consisted of. A 5.8GHz antenna with SMA or MMCX connector is required, not consisted of.
*All Spektrum Airware based transmitters are compatible with the Spektrum frequency control system with the most recent firmware updates. If your transmitter does not include the VTX menu it might be needed to register your transmitter at SpektrumRC.com and upgrade the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license required for use in North America. Please seek advice from the ARRL for additional information about your regional amateur radio club and getting your HAM license. www.ARRL.org