Spektrum 25/200/600mW Adjustable Power Video Transmitter

Summary

Summary

FPV flyers searching for a little feature abundant video transmitter will find the Spektrum VT1000 checks all the right boxes. The VT1000 includes frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an integrated microphone, and a powerful frequency management tool constructed right into Spektrum innovation.* Altering the band, channel and power level can be handled from two push howevertons on the circuit board, but much of the time those will just be booked for backup. The Spektrum incorporated frequency control system lets a pilot make all the modifications for an FPV system directly from the transmitter.
All FPV pilots can gain from remote frequency control. Envision removing those irritating dip switches or buttons. Envision changing the frequencies prior to a race without needing to take the models off the starting grid. Envision the installing choices that are opened up without the constraints of needing physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power directly from compatible Spektrum transmitters. Pilots can also turn the video transmitter off or run at a really low power setting for test purposes, which makes the VT1000 perfect for complex tasks requiring a great deal of time screening on the bench.
The VT1000 can be linked to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it has to get in touch with the receiver system is to “Y” off the serial signal wire. An MMCX connector for the antenna is used on the circuit board for durability and lightweight. Installing holes in the circuit board allow easy installing with typical plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are included. A 5.8GHz antenna with SMA or MMCX connector is required, not included.
*All Spektrum Airware based transmitters work with the Spektrum frequency control system with the most current firmware updates. If your transmitter does not include the VTX menu it may be needed to register your transmitter at SpektrumRC.com and update the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license required for use in The United States and Canada. Please speak with the ARRL to learn more about your regional amateur radio club and getting your HAM license. www.ARRL.org