Spektrum 25/200/600mW Adjustable Power Video Transmitter

Introduction

Introduction

FPV flyers looking for a small function rich video transmitter will find the Spektrum VT1000 checks all the right boxes. The VT1000 includes frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an incorporated microphone, and an effective frequency management tool constructed right into Spektrum technology.* Changing the band, channel and power level can be dealt with from 2 push howevertons on the circuit board, but much of the time those will just be reserved for backup. The Spektrum integrated frequency control system lets a pilot make all the adjustments for an FPV system directly from the transmitter.
All FPV pilots can take advantage of remote frequency control. Think of eliminating those annoying dip switches or buttons. Think of changing the frequencies prior to a race without needing to take the models off the beginning grid. Think of the installing options that are opened up without the restraints of requiring physical access to the video transmitter. Select the band and channel you want to fly on and set the output power directly from compatible Spektrum transmitters. Pilots can likewise turn the video transmitter off or perform at an extremely low power setting for test functions, makings the VT1000 perfect for complicated tasks requiring a lot of time testing on the bench.
The VT1000 can be connected to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it has to get in touch with the receiver system is to “Y” off the serial signal wire. An MMCX port for the antenna is used on the circuit board for sturdiness and light weight. Installing holes in the circuit board make it possible for simple installing with common plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are consisted of. A 5.8GHz antenna with SMA or MMCX port is needed, not consisted of.
*All Spektrum Airware based transmitters are compatible with the Spektrum frequency control system with the most recent firmware updates. If your transmitter does not consist of the VTX menu it may be essential to register your transmitter at SpektrumRC.com and update the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license needed for usage in North America. Please speak with the ARRL to learn more about your local amateur radio club and getting your HAM license. www.ARRL.org