Spektrum 25/200/600mW Adjustable Power Video Transmitter

Overview

Overview

FPV leaflets searching for a little feature abundant video transmitter will discover the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an incorporated microphone, and a powerful frequency management tool developed right into Spektrum technology.* Altering the band, channel and power level can be managed from two push buttons on the circuit board, but much of the time those will only be scheduled for backup. The Spektrum incorporated frequency control system lets a pilot make all the modifications for an FPV system directly from the transmitter.
All FPV pilots can take advantage of remote frequency control. Picture removing those frustrating dip switches or buttons. Picture altering the frequencies prior to a race without needing to take the designs off the beginning grid. Picture the mounting choices that are opened up without the restrictions of requiring physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power directly from suitable Spektrum transmitters. Pilots can also turn the video transmitter off or run at a really low power setting for test functions, which makes the VT1000 perfect for complex tasks requiring a lot of time screening on the bench.
The VT1000 can be linked to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it needs to get in touch with the receiver system is to “Y” off the serial signal wire. An MMCX adapter for the antenna is utilized on the circuit board for sturdiness and light weight. Installing holes in the circuit board make it possible for easy mounting with typical plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are included. A 5.8GHz antenna with SMA or MMCX adapter is required, not included.
*All Spektrum Airware based transmitters work with the Spektrum frequency control system with the most current firmware updates. If your transmitter does not consist of the VTX menu it may be required to register your transmitter at SpektrumRC.com and upgrade the firmware to access the VTX menu.
**Crash damage from utilizing the mounting holes is not covered under the warrantee.
Important: Amateur radio license required for use in The United States and Canada. Please consult the ARRL for more details about your regional amateur radio club and getting your HAM license. www.ARRL.org