Spektrum 25/200/600mW Adjustable Power Video Transmitter

Introduction

Introduction

FPV leaflets searching for a small feature rich video transmitter will discover the Spektrum VT1000 checks all the right boxes. The VT1000 consists of frequency assistance on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an integrated microphone, and an effective frequency management tool built right into Spektrum innovation.* Altering the band, channel and power level can be dealt with from 2 push buttons on the circuit board, but much of the time those will just be scheduled for backup. The Spektrum incorporated frequency control system lets a pilot make all the modifications for an FPV system directly from the transmitter.
All FPV pilots can take advantage of remote frequency control. Envision getting rid of those irritating dip switches or buttons. Envision changing the frequencies before a race without needing to take the designs off the beginning grid. Envision the mounting options that are opened up without the constraints of needing physical access to the video transmitter. Select the band and channel you want to fly on and set the output power directly from suitable Spektrum transmitters. Pilots can likewise turn the video transmitter off or perform at a really low power setting for test functions, which makes the VT1000 ideal for complicated tasks requiring a great deal of time screening on the bench.
The VT1000 can be connected to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it has to get in touch with the receiver system is to “Y” off the serial signal wire. An MMCX connector for the antenna is used on the circuit board for resilience and light weight. Mounting holes in the circuit board allow easy mounting with common plastic standoffs such as SPMVX180.** An SMA adaptor cable and wire harness are included. A 5.8GHz antenna with SMA or MMCX connector is required, not included.
*All Spektrum Airware based transmitters are compatible with the Spektrum frequency control system with the most recent firmware updates. If your transmitter does not include the VTX menu it may be needed to register your transmitter at SpektrumRC.com and update the firmware to access the VTX menu.
**Crash damage from utilizing the mounting holes is not covered under the warrantee.
Important: Amateur radio license required for usage in The United States and Canada. Please seek advice from the ARRL for more information about your regional amateur radio club and getting your HAM license. www.ARRL.org