Spektrum 25/200/600mW Adjustable Power Video Transmitter

Summary

Summary

FPV leaflets searching for a small feature abundant video transmitter will find the Spektrum VT1000 checks all the right boxes. The VT1000 includes frequency support on all legal 5.8GHz channels, selectable power output (25mW, 200mW, and 600mW), an incorporated microphone, and a powerful frequency management tool built right into Spektrum technology.* Altering the band, channel and power level can be managed from two push howevertons on the circuit board, but much of the time those will only be reserved for backup. The Spektrum integrated frequency control system lets a pilot make all the modifications for an FPV system directly from the transmitter.
All FPV pilots can benefit from remote frequency control. Picture getting rid of those irritating dip switches or buttons. Picture changing the frequencies before a race without needing to take the designs off the beginning grid. Picture the installing options that are opened up without the constraints of requiring physical access to the video transmitter. Select the band and channel you wish to fly on and set the output power directly from compatible Spektrum transmitters. Pilots can also turn the video transmitter off or perform at an extremely low power setting for test functions, which makes the VT1000 suitable for complex jobs needing a great deal of time screening on the bench.
The VT1000 can be linked to any flight controller utilizing a Spektrum DSMX serial receiver or any Spektrum DSMX receiver utilizing remote receivers. All it has to connect with the receiver system is to “Y” off the serial signal wire. An MMCX connector for the antenna is utilized on the circuit board for sturdiness and lightweight. Installing holes in the circuit board make it possible for simple installing with common plastic standoffs such as SPMVX180.** An SMA adaptor cable television and wire harness are consisted of. A 5.8GHz antenna with SMA or MMCX connector is needed, not consisted of.
*All Spektrum Airware based transmitters are compatible with the Spektrum frequency control system with the most recent firmware updates. If your transmitter does not consist of the VTX menu it might be necessary to register your transmitter at SpektrumRC.com and upgrade the firmware to access the VTX menu.
**Crash damage from utilizing the installing holes is not covered under the warrantee.
Important: Amateur radio license needed for use in North America. Please seek advice from the ARRL to learn more about your regional amateur radio club and getting your HAM license. www.ARRL.org