Savox Waterproof Standard Digital Servo 0.15Sec / 208Oz @ 6V

The SW0231MG is a budget plan friendly waterproof digital servo with great torque for numerous applications. This brushed servo functions a speed of .17 and 208.0 oz-in of torque 6.0V. It integrates leading edge technology with super high 12-bit (4096) resolution and metal gears for your greater accuracy when evading puddles. This is a fantastic upgrade if your aiming to drive your RC vehicle in any condition...rain, sleet, or snow.

Features:

• Integrates cutting edge
  technology with super high 12 bit (4096) resolution and metal gears.
• Waterproof.
• Brushed motor
• Very strong metal gears guarantee long-life and durability.
• Our servos are completely green ? from products to production, these servos are ecologically friendly.
• Ideal for RC automobiles, trucks, buggies, and boats.

Dimensions(mm): 41.8x20.2x42.9
Weight(g): 66
Speed(@6.0V sec/60): .17
Torque(@6.0V oz-in): 208.0
Gear: Metal
Bearing: 2BB
Case: Plastic
25 Tooth Spline
IP Score: 67
Frequency: 200-250hz
Pulse Width Frequency: 1520

This item is often acquired with the above stated item.

Aluminum Servo Horn 25T

This is the Axial 25T Aluminum Servo Horn for Futaba, Axial and Savox Servos.

FEATURES:
Difficult anodized aluminum construction
Compression install, two screws set up on either side of arm and
    tighten center hole around servo spline

INCLUDES:
Axial 25T Aluminum Servo Horn
2 2x8mm socket head screws

SPECS:
Length: 0.98" (25mm) from center of servo mounting hole to end of arm
Hole Diameter: 3mm
Pitch:3x30

This item is often acquired with the above stated item.



This is a optional Racers Edge Aluminum single arm servo horn, intended for use with Futaba servos. This strong aluminum servo horn is similar in design to the Racers Edge Pro Adjustable servo horns, but includes a third linkage mounting point and does not utilize lock down screws.

This item praises the above reviewed item.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Perfect upgrade for radios found in RTR automobiles
Throttle and steering trim and reverse
Guiding double rate dial
Throttle end point modification
Channel 3 switch
Throttle fail safe
One year restricted guarantee through Hobby Services beginning at date
    of purchase

INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Direction
    Handbook and On/Off Change

REQUIRES:
Servos of modeler's option
4 AA batteries for transmitter

SPECS:
Transmitter:
Transmitting Frequency: 2.4GHz band
Power Requirement: 4 AA cells
Existing Drain: 100mA or less

    Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shown servo)
Battery Fail Safe Voltage: 3.8V*
Existing Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work correctly when other type of battery is used

REMARKS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
type of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
    digital servos including the BLS series and most peripheral
    devices such as brushless ESCs