Savox Waterproof Micro Digital Servo 0.11Sec / 69Oz @ 6V

WATERPROOF DIGITAL MICRO SERVO .11/69@6V SUITABLE FOR TRAXXAS 1/16

Many others have actually bought this item along with the item that you are currently checking out.



This 2-cell Lithium Polymer 2000mAh battery pack is the perfect size, shape and weight for lots of 1/16 and 1/18 scale vehicles and trucks, and the 50C discharge rate gives you the top-end power and performance you want. It's also a terrific option for mid-size parkflyer planes. 50C continuous discharge rate of 100 amps. Features Traxxas connectors on the discharge leads.
Also readily available with Deans or EC3 connectors!
Specifications

Length: 93 mm
Width: 31 mm
Height: 17 mm

Get this item to improve the one you read around.

Steering Arm (Upper & Lower)/

This is the Steering Arm for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
Upper and Lower Steering Arm
Steering Link
Servo Horn
Servo Saver
Servo Saver Spring
Servo Horn Mount
2 Ball Studs
Front and Rear Shock Mounts
Four 2.5x18mm Cap Head Screws

NEEDS:
Setup on the car

This item is frequently bought with the above stated item.

Hollow Balls, Steel (Machined)

    These are the Machined Steel Hollow Balls from Traxxas.

FEATURES:
Steel construction
Silver in color

CONSISTS OF:
Twenty 2 Hollow Balls

SPECS:
Length: 5mm (0.20")
Outer Size: 4.5mm (0.18")
Inner Size: 2.5mm (0.1")

Many others have actually bought this item along with the item that you are currently checking out.

Ball Bearings, Blue Rubber Sea

These are the Rubber Sealed Ball Bearings for use on the
Traxxas 1/16 E-Revo and Slash VXL 4WD Vehicles.

FEATURES:
Blue rubber sealed
May also be used in any car where this size bearing is required

CONSISTS OF:
2 Ball Bearings

NEEDS:
Setup on the car

SPECS:
Outer Size: 8mm (0.31")
Inner Size: 4mm (0.16")
Width: 3mm (0.12")

You will certainly love this thing if you have the thing above mentioned.

Gear Set (For 2080 Micro Water

This is the Servo Equipment Set for use on the
Traxxas VXL Micro Waterproof Servo (TRAM2080).

FUNCTIONS:
Nylon construction
Grey in color

CONSISTS OF:
One Output Equipment
One Top Decrease Equipment
One Center Decrease Equipment
One Bottom Decrease Equipment
Guideline sheet

NEEDS:
Setup on the servo

Get this item to improve the one you read around.



These are the optional Hot-Racing Long Aluminum Toe-Links
for the 1/16 scale Traxxas E-Revo, Tomb Digger and Summit vehicles.

FEATURES:
Aluminum construction, red in color
Brass pivot ball bushings
Replaces Traxxas #7138 & 7138G stock plastic toe-links
Thirty day minimal guarantee starting at date of purchase-valid
    in the United States only

CONSISTS OF:
2 Aluminum Links with one Open Ball End and one Ball Stud End
2 Aluminum Links with 2 Open Ball Ends

SPECS:
General Length: 3.33" (84.5mm)

The below item additionally pairs truly well with the item being reviewed.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Publishes for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

CONSISTS OF:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

NEEDS:
Setup on the car