Savox Standard Size Coreless Digital Servo 0.08Sec / 166Oz @ 6V

The SC1258TG integrates leading edge technology with extremely high 12-bit (4096) resolution and titanium and aluminum gears for one remarkable servo! With titanium and aluminum gears, this servo is genuinely wonderful. Pushing 167 ounces of torque and a blistering .08 transit time, this servo is redefining what a well-rounded servo should be capable of. This is a fantastic upgrade to many comparably priced servos.

Features:

• Integrates leading edge
  technology with extremely high 12 bit (4096) resolution and titanium gears.
• Super light-weight.
• Coreless motor offers high speed, amazing effectiveness, and low power consumption.
• Extremely strong titanium gears make sure long-life and durability.
• The aluminum case design not only looks good but also allows for cooler and smoother operating temps.
• Our servos are totally green ? from materials to production, these servos are environmentally friendly.
• Ideal for CCPM on 600 and 700 class heli, guiding servo on 1/10 scale buggies.

Dimensions(mm): 40.3x20.2x37.2
Weight(g): 52.4
Speed(@4.8V sec/60): .10
Torque(@4.8V oz-in): 133.3
Speed(@6.0V sec/60): .08
Torque(@6.0V oz-in): 166.6
Equipment: Titanium & Aluminum
Bearing: 2BB
Case: Aluminum
25 Tooth Spline
Frequency: 250-333hz
Pulse Width Frequency: 1520

Below is another item that praises the item being talked about.



This is a set of 1/10 Scale Nitro Shoes 35° Sedan Front Foam Tires
and Wheels from Jaco.

FEATURES:
For 1/10 scale nitro exploring vehicles
Specially produced the high speed demands of nitro touring vehicles
Mounted on stiff 26mm broad white 6-hole rims
Glued with CA to bond the rubber to the rim
Utilized by a few of the leading racers all over the world

INCLUDES:
2 1/10 Scale Nitro Shoes 35° Sedan Front Foam Tires and Wheels

SPECS:
Diameter: 2.54" (64.64mm)
Width: 1.07" (27.15mm)
Hex: 12mm

COMMENTS:
The hardness of materials is most frequently measured by the Coast
    Durometer test. This approach determines the resistance of foam toward
    imprint and offers a solidity value. A Coast Durometer is the
    international requirement for determining the hardness of materials.
    The sign for shore accompanies that of degrees.
    In referral to foam tires, the lower the shore rating, the softer
    the tire is therefore yielding more traction. The greater the shore
    rating, the firmer the tire is therefore yielding less rolling
    resistance and more speed.

Below is a great item that many others have actually purchased the very same time.



This is the DuraTrax Onyx 7.4V 5000mAh 25C Hard Case LiPo Battery
with the Star Plug.

FEATURES:
Ideal for 1/10 scale vehicle applications
Prewired with Star Plug
Star plug works with the R/C market's most frequently used
    polarized power plug, tapered shape and grip strips for fast and
    easy connection and separation

INCLUDES:
7.4V 5000mAh 25C Tough Case LiPo Battery with Star Plug

REQUIRES:
Balancer and LiPo suitable charger or LiPo charger with built-in
    balancer such as the Onyx 235, DTXP4235

SPECS:
Voltage Rating: 7.4V
Rated Capacity: 5000mAh
Release Rating: 25C continuous
Measurements: 1.77 x .94 x 5.4" (45 x 24 x 137mm)
Weight: 10.2oz (288g)
Discharge Lead/Connectors: 12AWG Wires, Star Plug
Balancing Connector: ElectriFly
Watt Hours: 37Wh

COMMENTS:
ALWAYS utilize a LiPo-approved Charger
ALWAYS utilize a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents higher than 1C
NEVER Trickle Charge
NEVER permit to Release listed below 2.5V per cell
NEVER dismantle or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
    charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
CONSTANTLY shut out of reach of kids
All weights consist of wire leads and plugs
All weights +/- 1 g