Saito Engines FA-125A AAC with Muffler: AG

Features

Less weight however more thrust
10 ounces lighter than the FA-120
Turns an APC 16x6 at 9,000 rpm
13mm Muffler threads

Overview

Only Saito could put 1.25 cubic inches of power into a 1.00-size case. Not only is the FA-125 lighter and more powerful than the FA-120 it replaces, its unique size permits modelers to apply its incredible power to a wide array of airplane sizes. It will deal with anything from .90-size sport aerobats all the way approximately 1.20-size sport and IMAC planes. As with most Saito engines, the FA-125A is offered in a stunning Golden Knight variation with a gloss black surface and gold-plated valve covers.

With 10 fewer ounces and .05 more cubic inches than the FA-120 it replaces, the FA-125A gives new significance to the term “escape velocity.” Just bolt one to the nose of Garage 9’s ShowTime™ 90 and you’ll see what we mean.



You will need...
Prop:  16x6

Specs

Type: 4-Stroke
Displacement: 1.25 cu in (20.52cc)
Bore: 1.24 in (31.7mm)
Stroke: 1.02 in (26.0mm)
Cylinders: Single AAC
Overall Weight: 24.69 oz (700 g)
Engine (Only) Weight: 21.87 oz (620 g)
Muffler Weight: 2.89 oz (80 g)
Crankshaft Threads: M8 x 1.25mm
Benchmark Prop: APC 16X6 @ 9,000 rpm
Prop Variety: 15x7 - 17x6
RPM Variety: 1,800 - 10,000 rpm
Fuel: 10% - 30% nitro Synthetic mix
Installing Measurements: 119 x 60 x 127mm
Muffler Type: Cast
Cylinder Type: AAC
Carbohydrate Type: 2 Needle
Crank Type: Dual Ball Bearing